| CLEAN~VOLT |
| MOST FREQUENTLY ASKED QUESTIONS |
| * What is a CLEAN~VOLT Lightening Spike / Surge Suppressor ? * The CLEAN~VOLT is a state-of-the-art lightening arrester which protects all of the equipment within the entire environment (be that a business, home or an entire plant) in the same way a lightening arrester protects utility equipment from lightening. * How does it work ? * The CLEAN~VOLT unit is hard wired to a circuit breaker panel monitoring the voltage of each phase of power. Every time a motor switches on or off, or someone completes a task as small as hitting a typewriter key, surges and transients are created within the building that comes back to the panel. At this point , the CLEAN~VOLT unit will reach out, grab and shunt to ground any and all damaging transient voltage surges traveling at 1.0 nanoseconds or slower (billionths of a second) at 130 volts or higher. * If a motor runs cooler does that mean that it is less powerful or runs slower ? * ABSOLUTELY NOT ! With the CLEAN~VOLT unit the motor is using exactly the amount of electricity it needs to do the job. The motors' rpm's does not changs simply because it is using less power than the motor that is using more power. When a motor runs cooler, productivity is not hindered. In fact, the life of the electrical equipment doubles for every ten degrees cooler that the motor runs. The lower cost of maintenance is just one of the ways CLEAN~VOLT will save you money. * Does the CLEAN~VOLT unit interfere with machinery or appliances that already have energy saving features such as refrigerators with energy miser switches ? * NO ! CLEAN~VOLT is engineered with the cosumers best interest in mind. We want you to get the maximum savings possible. Adding a CLEAN~VOLT unit to any existing energy saving products will significantly increase overall savings on power consumption. * Do you have anything that protects the whole business? * ABSOLUTELY ! CLEAN~VOLT will not only protect all motors and aplliances in the business but it will reduce total kilowatt-hour electrical consumpsion up to 20% or more. * Has CLEAN~VOLT been tested in actual use ? * ABSOLUTEY ! All products have been extensively tested and have proven total protection and energy savings. * Can CLEAN~VOLT damage machinery or the power unit ? * ABSOLUTELY NOT ! CLEAN~VOLT is a passive device. |