 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
<<BACK |
|
|
|
<<HOME>> |
|
|
|
|
|
Alcohol Injection |
|
|
|
What is it? |
|
|
|
This setup consists of: (1) A small tank for the alcohol, (2) a fuel pump, (3) a NAPA pressure switch, (4) a junk yard cold start injector, (5) a rocker "on-off" switch, (6) and some really MINOR wiring and hose running.
- The coolant tank/pump assembly will be placed right next to the radiator fan,
- The pump output run to the cold start injector in your air intake tube.
- The switch will be used to turn the assembly COMPLETELY off, or allow it to work when the correct amount of boost is reached through the pressure switch.
This setup will allow the fuel mixture to see more "fuel" when the alcohol that was sprayed into the air charge reaches it, increasing octane/"richness" and allowing more boost capability.
(Note: An average relay could be used to protect the setup's wiring as well, using the wire to the switch as the control wire.) |
|
|
|
Items purchased |
|
|
|
Worm gear clamps: $4.00 |
|
Light up switch: $1.99 |
|
|
|
3 inches of � radiator hose: $0.35 (suction side of pump to copper elbow) |
|
|
|
45 degree copper elbow: $0.99 (to adapt huge suction side of pump to 5/16 line) |
|
|
|
Inline fuse holder for pump: $1.99 |
|
|
|
Items from garage |
|
|
|
Fuel pressure regulator |
|
|
Fuel pump |
|
|
|
Coolant tank |
|
|
|
|
|
|
|
|
|
|
Plastic T |
|
Zip ties |
|
|
|
Various clamps and hose |
|
|
|
|
|
|
Relay, wire, and connectors |
|
|
|
Pressure switch |
|
Extra injector |
|
Plastic vacuum hose |
|
|
|
------------------------------------------------ |
|
|
|
Grand total: $9.32!! |
|
|
|
Electrical Wiring |
|
Finished pic |
|