RERX7 is now being a project car by RacingEvolution
This is a 1993 Mazda RX7, base model with 280hp on the wheel and 284.7 torque! Dynoed!
Dyno result:
280hp@6500rpm
285 torque@5000rpm
Doing 240km/h
at 8000rpm on 4th gear.? (Done on the Dyno Machine)

Did 280km/h at 6200rpm on 5th gear.?
Performance parts on the car.
PFS down pipe,
3 inch custom mid pipe,
Tanabe G-Power cat-back exhaust,
Koni adjustable shocks,
Kg/mm springs,
Tower bar,
Brembo air slotted brake discs in fornt and cross drilled at the back,
Brembo steel brake lines (SOLD),
KVR carbon pads,
Greddy Pulley Kit,
HKS F-Con,
HKS FCD,
HKS Super BlowOff Valve (SOLD),
Apexi AVC-R fuzzy logic eletronic boost controller (installed but never plugged in),
RE-Amemiya air intake,
Turst turbo timer,
2 1/4" Autometer boost gauge,
2 1/4" air/fuel ratio gauge,
A dual gauge pod (A pillar mounted)
NGK 8mm spark plug wires,
PIAA carbon fiber wipers(discontinued), Racing sparco steering wheel,
Sparco shiftknob,
Crow Enterprise 3" 5pts seat belt,
Kenwood single CD player with radio,
Custom alarm system
One set of original rims made by Enki
One set of 245/45/16 BFG g-Force R1,
One set on 3 piece Simmons rims with Yokohama A510 225/45/16 in front and 245/45/16 in the rear.
Small custom made duct to the airfilter.
The silver 1993 Mazda RX7 is a truely remarkable sports car, using a g-tech pro it run an average 5.3sec from 0~60 and a consistant 14sec for 1/4 mile when stock.? After the mods on the right it dynoed 280hp on the wheel, with some more tuning it should pump more than that.? The top speed tried on the car was 280km/h and it is still going, on the dyno at 4th gear near redline the car is doing 240km/h.? The dyno facility didn't provide it with enough air, so the car is running quite rich if proper mixture is provided the car should perform alot better.?
Now it is a project car by Racing Evolution of Mississauga, Canada.? There are no plans on increasing the horse power because right now it have more than I can handle efficiently on the track.? There are future mods planed for this car, mostly to make the car more suitable for track days.? Bigger brakes, larger radiator and oil cooler will be one the list along with race seats, lighter and bigger wheels to be fitted with the bigger brakes.? Some custom body and interior works will also be done.
So stay tuned for more pictures and more info.
Thank you for visiting.? Happy Rotoring! =)
Visit TURBO ONLY(my friend's site of his 944 Turbo)
Thank You for visiting ('^.^)
email me at
Hosted by www.Geocities.ws

1