 |
| You can click on any of the images for a separate window. |
|
 |
| This table was the first attempt at making furniture. This piece was made from knotty pine. The legs were constructed from 1 x 3 lumber that are tapered and have a fluted design. |
| The staircase in this house was unfinshed. There were Oak treads with pine risers. I made oak veneer risers and attached and finished. The bottom stair required kerfs to be cut to make the full turn around the riser |
 |
 |
| The entertaiment center can hold up to a 32" television. There is a shelf below to store the VCR, cable box and xbox. The cabinet also has a closed compartment behind the raised panel doors. for all the miscellaneous stuff. It is assembled from solid number 2 pine and three coats of polyureathane |
| The Cabinet is made from 3/4"" oak plywood with solid oak frame and panel doors. The top is framed with crown molding that I made from 1x4 oak. The two shelves are mounted on adjustable pins. |
 |
 |
 |
| The Cabinets were built to match the original cabinents in the kitchen. They are assembled from 3/4 oak plywood and with solid oak raised panel doors. Finish is three coats of polyureathane |
 |