NORMES ASTM D ( 3501 à 4000 )

 

Chemicals

and for Differentiating Between Heartwood and Sapwood

Changes of Textile Fabrics: Brush Pilling Tester

Changes of Textile Fabrics: Random Tumble Pilling Tester

Fiber

Changes of Textile Fabrics: Elastomeric Pad

Mixtures

Thermosetting-Resin) Pressure Pipe

Matrix Composite Materials by Tensile Test of a +45° Laminate

(Magnetic Quenchometer Method)

Board

(Saturating) Wax in Corrugated Board Facing

and Solids (Differential Mackey Test)

Engine Oils by Gas Chromatography

Engine Oils by Gas Chromatography

Grease

Adhesive Joints by Tension Loading

Content of Composite Prepreg

Prepreg

Water

Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use)

Exposure Conditions

by Shell Thin-Film Evaporometer

Grade)

Elastomeric Joint Seals for Bridges

Modulus Fibers

by Gas Chromatography

Paving Mixture Specimens

Mixtures Using a Mechanical Mixer

Matrix Composites

Reinforced Metal Matrix Composites

High-Density Polyethylene Insulation for Wire and Cable

Polyethylene Insulation for Wire and Cable

Dishwashing

Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

Fabrics

Composition Tile or Flooring

Mechanical Dishwasher Detergents

of Chlorine by Oxygen Combustion

(Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

Propylene Diene Terpolymers) Including Mixtures With Oil

Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements

Dishwasher Water Inlet Hose

and Molded Urethane Foams

Olefin Polymers

Penrose-Type

Test of Products

Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete

Pavements

and Relative Density of Gaseous Fuels

Poly(Vinyl Chloride) (PVC) in Formulated Compounds

Ethylene-Ethyl Acrylate Copolymers

Extruded Plastic Sheet and Film

General-Purpose Poly(Vinyl Chloride) (PVC) Resins

or Flocked

Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

Atomic Absorption and Flame Emission Spectroscopy

Finished Motor and Aviation Gasoline by Gas Chromatography

Engine Oils by Stripping

Atmosphere by the Griess-Saltzman Reaction

Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

Tapes

Insulating Oil by Gas Chromatography

Analysis and Determination of Water Content

Atmospheres and Emissions

Index, and Dilute Solution Viscosity

Roof Membranes

Paint Films

(Anhydrous)

Submergence

Paint by Atomic Absorption Spectroscopy

Aggregate Using Boiling Water

Standards)

Hazardous Contained in Protective Coatings

Oxygen-Pressure Method

Systems

Atomic Absorption Spectrophotometry

Electrical Insulating Materials

Electrical Insulating Materials

Standard Test

Thermoplastic Molding and Extrusion Materials

Resins

Resins

Shapes According to Composition

Water

Brines

and Gummed Tapes

Tapes

Knitted Overcoat and Jacket Fabrics

from Vinyl-Coated Glass Yarns

Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

Semi-Restraint Method

Carriers

for Capacitors in Electrical Equipment

and Inspecting Bituminous Paving Materials

Solar Collectors

Soil-Lime Mixtures

Methods of Committee D-22

Sulfonates

Materials Using A Radiant Heat Energy Source

or Rug Underlay

Spectrophotometry

Interior-Profile Extrusions

Content of Poly(Vinyl Chloride) Resins, Compounds, and Copolymers by Solution

Injection Technique

(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

Ash by Atomic Absorption

Atomic Absorption

Combustion/Atomic Absorption Method

Particulate Matter in Stack Gases

Compound Vapors (Activated Charcoal Tube Adsorption Method)

by the Activated Charcoal Tube Adsorption Method

Tensile Load

Urethane-Coated Upholstery Fabrics-Indoor

Household Curtain and Drapery Fabrics

and Household Furnishings

Sewing Thread

Preservation of Organic Constituents

Aqueous-Injection Gas Chromatography

Fish Flesh

Floating Piston Cylinder

by Low Resolution Nuclear Magnetic Resonance Spectrometry

of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing

Machine

Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

Fluids

the Flat Spring Test

Emulsions by the Oven Test Method

Coating Operation

Under Low to Ambient Temperature Cycling Conditions

Gasoline and Gasoline Fractions by Gas Chromatography

Films and Vapors

Sulfonates by Liquid Chromatography

Tapes

Paint by Atomic Absorption Spectroscopy

Paint by Atomic Absorption Spectroscopy

Exterior Panels

Dioxide Pigments by X-ray Diffraction

Pigments

Paints by Low-Temperature Ashing

Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography

Wall Coatings

Algae in Surface Waters

Ultraviolet-Cured Coatings

and Silicone-Modified Alkyds by Atomic Absorption

Laminated Timber (Glulam)

Sheeting

Langelier Saturation Index for Reverse Osmosis

the Testing and/or Inspection of Soil and Rock as Used in Engineering Design

and Construction

Halogenated Organic Solvents

Substructure Protection

Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)

Roofing Systems

Adhering Roof Insulation

Thermoplastics

Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

Cementitious Matrix

and Wetwells

Thermosetting-Resin) Sewer and Industrial Pressure Pipe

Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress

Breakdown By Treeing In Solid Dielectric Materials Using Diverging Fields

Polishes

Floors

Pressure-Sensitive Tapes

Chromatography

Combustion/Ion Selective Electrode Method

Aluminum (Wedge Test)

Using Load and Displacement Sensors

Bromide) Surface Area

Sag

Solar Collectors

Rainwear and All-Purpose, Water-Repellent Coat Fabrics

Suit Fabrics and Woven Sportswear Jacket, Slack, and Trouser Fabrics

Rainwear and All-Purpose, Water-Repellent Coat Fabrics

Suit Fabrics and Knitted Sportswear Jacket, Slack, and Trouser Fabrics

Men's and Boys' Apparel

Bathrobe and Dressing Gown Fabrics

Fabrics

by Oven Drying

Injection Into a Gas Chromatograph

Films

Thermosetting Plastics by Torque Rheometer

Characteristics of Solid Plastics in a Vertical Position

Coatings

Paints (2-Foot Tunnel Method)

Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

Adhesives to Substrates by Spot Adhesion

Capacitors

Child-Resistant Closures

Tapes

Pressure-Sensitive Tapes

Materials

Pressure-Sensitive Tapes by Carbon-Arc Exposure Apparatus

Pressure-Sensitive Tapes

Fabrics

Underwear Fabrics

Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method

Fast-Bubble Technique

Polyethylene and Polypropylene Using a Tensile Test

Petroleum and Other Organic Liquids

Temperature of Engine Oil

Spectroscopy

Solar Energy Systems

Pressure-Sensitive Tapes

Materials by Means of a Capillary Rheometer

(Glass-Fiber- Reinforced Thermosetting-Resin) Pipe

Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

Panels

Applied to Nuclear Facilities

Containers

Plastics

Temperatures

(Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

Dimensions from Electron Microscope Image Analysis

Electrical Insulating Materials By Thermogravimetric Method (TGA)

Materials

Cresylic Acid

Latices-Abbreviations for Chemicals Used in Compounding

Standard Washing Solution Treatment

in Sampling and Analysis of Water

by Velocity-Area Method

Activated Carbon by Aqueous Phase Isotherm Technique

in Membrane Filters

Membrane Filters Used in Routine Filtration Procedures for the Evaluation of

Microbiological Water Quality

0.45-um Membrane Filters Used in Routine Filtration Procedures for the

Evaluation of Microbiological Water Quality

Analysis

Seawater, and Brines

Water, Seawater, and Brines

Colony Counting Methods in Microbiology

Using Headspace Sampling

Ammoniacal Copper Arsenate Solutions

Brines

Cellulose Ether Products by Gas Chromatography

Uplift Pressure of Soil-Lime Mixtures

(Rotary Platform, Double-Head Method)

(Flexing and Abrasion Method)

(Inflated Diaphragm Method)

Pressure-Sensitive Tape at Low Temperature

Varnish, Lacquer, and Related Products

Isoamyl Ketone by Gas Chromatography

Differential Scanning Calorimetry

Liquors

Tanning Liquors

in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene

Terpolymers)

Liquefied Petroleum Gas

Transport of Solar Energy Systems

Institutional Use

Intensities of Faujasite-Type Zeolite-Containing Materials

by Microactivity Test

on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method

Surfaced With Mineral Granules

Seal

Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

Light-Water Nuclear Power Plants

Liquors

Glass-Reinforced Plastic Rod

Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and

Fittings Used in Pressure Applications

Glass-Fiber-Reinforced Plastic Rod

Glass-Reinforced Plastic Pultruded Shapes

Products

Furnace Atomic Absorption Spectrophotometry

Water

Devices

Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials

Pigmented Coatings

Slurries

by Adhesives Using the Bent-Beam Method

Materials for Construction of Manufactured Homes

Adhesive Bonds in Shear by Compression Loading

Adhesives Bonding (Phosphoric Acid Anodizing)

Method by a Closed-Cup Apparatus

Material

Backin of Pile Yarn Floor Covering

Apparel and Other Textile Consumer Products

Method)

Method With a Closed-Cup Apparatus

a Faujasite-Type Zeolite

Alumina-Base Catalysts

Wax

Water-Dilutable Metalworking Fluids

Characteristics of Aviation Turbine Fuels by Portable Separometer

Insulation

Methods)

Tables

Structural Members Used in Log Buildings

(Halogenated Isobutene-Isoprene Rubber)

Fabrics-Discoloration Sensitivity to Tobacco Smoke

Content of Paints and Related Coatings

Aromatic Hydrocarbons by Oxidative Microcoulometry

Epoxy-Coated Reinforcing Steel Bars

Appearance Measurements

(ABS) Materials for Pipe and Fittings

Core Specimens

Child-Resistant Closures

Method

Determination

Cellulose

Hydrocarbons in Water

Sediments

Samples for Collaborative Testing of Methods for Analysis of Sediments

Chemical Analysis

Samples

Selenastrum Capricornutum

Medium-Density Polyethylene for General Use and Packaging Applications

Reinforced Thermosetting Resin) Duct and Hoods

Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

Tables

Film and Sheeting Using a Coulometric Sensor

Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

Water

Method

Driers by EDTA Method

of Grade

Grade

Career Apparel Fabrics Dress and Vocational

Analysis by Reflected Light

Damping Properties of Soils Using the Cyclic Triaxial Apparatus

·        D4000-95a Standard Classification System for Specifying Plastic Materials

Hosted by www.Geocities.ws

1