NORMES ASTM  D  ( 2001 à 2500 )

 

Naphthas

Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption

Chromatographic Method

Absorptivity of Petroleum Products

Activity in the Atmosphere by the Lead Dioxide Technique

Sole-Heated Oven

the Adiabatic Bomb Calorimeter

Natural Decay Resistance of Woods

and Paperboard

Chlorine-Containing Bleaches

in Detergents

Insulating Gases by Measurement of Dew Point

Water

Density of Bituminous Paving Mixtures

Trichloroethylene

Polish-Coated Floor Surfaces as Measured by the James Machine

Laundering

Drycleaning

Drycleaning

(Fog)

Packages with Continuous Thread Closures

Paints

Composite Wood Products Under Surfactant Accelerated Moisture Stress

Dispersions

 

Oils

Tertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by Referee

Potentiometric Method

Tertiary Amine Values of Fatty Amines by Alternative Indicator Method

Amidoamines, and Diamines

Quaternary Ammonium Chlorides

Chlorides

Ammonium Chlorides

Quaternary Ammonium Chlorides

Quaternary Ammonium Chlorides

Chlorides

Nitrogen Compounds

Secondary, and Tertiary Amines in Fatty Amines

Oscillating Disk Cure Meter

Calculating Pentachlorophenol in Solutions or Wood (Lime Ignition Method)

Liquids

Surfaces for Painting

Adhesive Bonding

Adhesion Tests

Bar and Rod Specimens

in the Washing of Leather

 

Upper Leather by the Dow Corning Leather Tester

Leather by the Maeser Water Penetration Tester

Electrical Insulating Purposes

40

"Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

(Alkalinity) of Halogenated Organic Solvents

Their Admixtures (Platinum-Cobalt Scale)

Solvents and Their Admixtures

Organic Solvents and Their Admixtures

Solvents and Their Admixtures

Insulating Oil by Rotating Bomb

Site Investigation

Chloride) Compositions

Materials

Content for Wool and its' Products

[alpha]-Methylstyrene

and Fittings

Chloride) Compounds Using an Infrared Spectrophotometric Technique

Thermal and Humid Aging

(Platinum-Cobalt Scale)

Fibers by Microprojection

of Electrical Insulating Materials

Sward-Type Hardness Rocker

Test

Flexible Polymers and Coated Fabrics

of Petroleum Origin

Thermosetting Plastic Pipe

by Infrared Absorption

Electrical Insulation

Dissipation Factor Of Solid Ceramic Dielectrics At Frequencies To 10 MHz And

Temperatures To 500°C

by Rubber Compounding Ingredients

Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

Burning Distillate Fuels

in Flue Gases From Burning Distillate Fuels

 

Saybolt Universal Viscosity or to Saybolt Furol Viscosity

§         D2162-99 Standard Test Method for Basic Calibration of Master Viscometers and

Viscosity Oil Standards

Gases and Propene Concentrates by Gas Chromatography

Animal Fibers

Soil

the Rubber Balloon Method

Mechanical-Rammer Soil Compactors

Viscometer

Bituminous Paving Mixtures

Tester

Waterproofing

 

Particulate Ion-Exchange Resins

Materials by Rotational (Brookfield type) Viscometer

Adhesion

Lacquers

From Vinyl Fabrics to Lacquers

Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

Method

Method

by the Mullen Test

Leather with the Cenco-Fitch Apparatus

Content of Soil and Rock by Mass

Particle-Size Analysis and Determination of Soil Constants

and Cable, 60°C Operation

and Cable, 75°C Operation

Materials

Resins

Insulation

Rubber Compounding Use

(Pico Abrader)

Unvulcanized Compounds

(Askarels) for Capacitors

Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

Methyl Groups at 1378 cm

Based on Controlled Inside Diameter

Pipe (SDR Series)

Coatings

Instrumentally Measured Color Coordinates

in Solvent-Reducible Paints

Relative Humidity

Glazing and Bedding Compounds on Metal Sash

Solvents and Their Admixtures

Single-Strand Method

Measured in Various Numbering Systems

(Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)

Wide Temperature Range

Lubricating Grease (Four-Ball Method)

Isooctane by Capillary Gas Chromatography

Ultraviolet Absorption

Kinematic Viscosity at 40 and 100°C

Fluids (Wear Test)

Rotating Pressure Vessel

Fuel Oil (Accelerated Method)

Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

Line Sampling

Preservatives in Round Post-Size Specimens

Skein Test

Plastic Pipe (SDR-PR)

(Askarels) for Transformers

Oils of Petroleum Origin Against Water by the Drop-Weight Method

Copolymer Molding and Extrusion Compounds

Plastics and Reinforced Plastics by Split Disk Method

Glass-Resin Composites

Compression Loading (Metal-to-Metal)

Tension Loading (Metal-to-Metal)

Tension Loading at Elevated Temperatures (Metal-to-Metal)

Electrical Insulating Polybutene Oil for Capacitors

Stress and Ionization (Modified Pirelli Method)

Electrical Insulating Tape

and Erosion of Insulating Materials

Insulating Materials

Insulation

Chromatography

Magnet Wire

Electrical Wire and Cable

(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

Pitch

Method)

(Pycnometer Method)

Pipe for Sewers and Other Gravity-Flow Applications

Artificial Perspiration

Coarse- and Medium-Textured Soils by Porous-Plate Apparatus

Water-Formed Deposits

Wavelength-Dispersive X-Ray Fluorescence

Lacquers

Multicolor Lacquers

Wood Construction in Shear by Tension Loading

Yarns, and Rovings Used in Reinforced Plastics

of Parallel Fiber Composites by Short-Beam Method

Specimens

Solvent Composition in Solvent-Reducible Paints

Separated From Solvent-Reducible Paints

from Solvent-Reducible Paints

Separated from Solvent-Reducible Paints

Emulsion Vehicles

Absorption

Surfactant and Syndet Compositions

Hydrocarbons by Gas Chromatography

Paints

Solvent-Reducible Paints

Driers by EDTA Method

Method

on Metal Sash

and Sealants

and 37% Grade Inhibited and Uninhibited

for Electrical Insulation

Chloride) (PVC) Compounds Under Humid Conditions

Butane-Butene Mixtures

Ignition of Monopropellents

Wood-Base Finish Flooring

Wood-Base Materials

Chloride) (PVC) Resins Using a Torque Rheometer

Electrical Insulation

(Centrifuge Procedure)

Characteristics of Plastic Pipe by Parallel-Plate Loading

Impregnated with a Liquid Dielectric

Number

(Modified Conradson)

Aggregate

Petroleum (LP) Gases (Lead Acetate Method)

Hydrocarbons to Gas-Volume, Liquid-Volume, or Weight Basis

System

Paperboard

Mass Spectrometry

Butadiene Concentrates by Gas Chromatography

Hydrocarbons in Gasolines by Gas Chromatography

(Constant Head)

Soils

Oil

Chlorinated Aromatic Hydrocarbons (Askarels) by Refluxing

Electronic Applications

Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

40 and 80, Based on Outside Diameter

Measuring the Specific Resistance of the Leachate of the Pigment

Sources-Limit on Coating

Compounds

Sash

Caulking Compounds

Resin-Base Caulking Compounds

Coatings

in Alkyd Resins

Alcohols in Alkyd Resins

Plastics

in Water

Toluene

Thermoplastic Containers

Plastic Pipe Fittings, Schedule 80

Fittings, Schedule 40

Fittings, Schedule 80

Plastic Pipe Fittings, Schedule 40

Reacting Thermosetting Resins

Strength of Insulating Gases at Commercial Power Frequencies

Preservatives for Marine Services by Means of Small Size Specimens

Electrical Insulating Tape

Temperature Service

Soil Classification System)

(Visual-Manual Procedure)

Bituminous-Aggregate Mixtures

Man-Made Staple Fiber or Tow

 

Hosted by www.Geocities.ws

1