Posted by Rajesh G. on March 11, 20102 at 11:31:43:
Sir/madum, i am looking for a entery level job in vlsi design field in india.
CURRICULUM VIATE
Name: RAJESH GUPTA
Address: S/o Dr. V.K. GUPTA,
Kachcha Katra Morh, Singh Bhavani
Gali,
Shahjahanpur, U .P.,INDIA - 242001.
Tel.: 05842-24448.
Present Tel.: 020-5539942/43, 9823295060.
Email: [email protected],
[email protected].
Objective: To pioneer in the field of VLSI Designing and utilize my potential to my best.
Areas of Interests: VLSI designing Microprocessor and Communication System design.
Education:
* P. G. Diploma In VLSI DESIGN: from BitMapper Integration
Technologies Pvt. Ltd. Pune. Passed in year 2002.
* B.Tech. Electronics &
Communication Engg.: from Institute of Engg. And Tech., Bareilly. Passed in year
2000.
* DGPA = 7.41 at the scale of 10. (Equivalent Percentage = 70 %).
*
SSC: from G.I.C. Shahjahanpur from U.P. BOARD. In Year 1994, 66.8% marks.
*
HSC: from G.I.C. Shahjahanpur U.P. BOARD. In Year 1992, 68% marks.
Cad Tool Used:
* Synplify 5.3, 5.5c with HDL Analyst, from Synplicity Inc.
* ISE 4.1 from Xilinx.
* Foundation Series v4.1i, v3.1i & v2.1i from
Xilinx.
* Model Sim plus II release 5.3,5.5c a Simulation Tool from Mentor
Graphics.
* Silos 2001 - Verilog simulator.
* ChipScope - Internal Logic
Analyzer from Xilinx.
Skill Set: VHDL, Verilog, C, C++, FoxPro, Assembly Languages 8085 and 8086, Synthesis, Simulation, CMOS VLSI, Memory Modeling, VHDL, Verilog, Finite State machines, Static Timing Analysis, Design For Testability, ASIC design issues.
Projects:
1. D.S.P. Based WIRELESS TRANSMISSION SYSTEM.
2. Numeric data
Co-Processor (Floating point).
3. Calculator.
4. UART (Transmitter and
Receiver).
5. Frequency Counter.
6. User friendly interactive display
device (Mobile Phone display device)
7. IC 8255.
8. Made Q.P.S.K.
Modulator (Analog).
Experience:
In the field of Automation Software design as a EDP-Manager
for 1-year
(from august-2000 to September-2001) at Melcole PR Agency
(Delhi).
Implant Trainings:
* At B.P.L. India Ltd. in field of T.V.
manufacturing and troubleshooting from May'99 to June '99.
* At OSWAL
Chemicals in field of AS/400 super computer based Distributed Control system
from May'98 to June '98.
Seminars:
* Reconfigurable Computing.
* Internet Telephony.
Extra-Curricular Activities:
* Won Table tennis championship at district
level in year 1996.
* Won Badminton championship at district level in year
1997.
* Won chess at district level in year 1996.
Other Interests: Playing games specially Chess and T.T.
Rajesh Gupta
Project Descriptions:
1) D.S.P. based Wireless Transmission System:
It uses digital AM
modulation and digital AM packet detector. Digital noise reduction. 4-point FFT
Co-processor for pre-emphasis and de-emphasis to further increase
performance.Use CDMA-Code mixer and CDMA-Code detector to transmit to different
computers. Use D/A, Frequency Up converter and transmitter to transmit (Analog).
Receiver, Frequency Down converter and an A/D to receive (Analog).
2) Numeric data Co-Processor (Floating-point):
This hardware is able to
handle floating-point arithmetic in digital world. It can add, sub and compare
two floating-point no's of IEEE-754 format.
3) Calculator:
This is a simple calculator. It is capable of multiply,
divide, add and subtract simple 4-Byte integer no's. It takes inputs from
Multiplexed Keyboard and gives output to Multiplexed Display.
4) UART (Transmitter and Receiver):
This is a simple Transmitter and
Receiver. It Transmit Parallel 8-bit data to serial 1-bit line and receives the
same and gives it in 8-bit parallel data format.
5) Frequency Counter:
This is a meter of Digital clock frequency and duty
cycle. It displays the result in a multiplexed display.
6) Mobile Phone display device:
This is a Mobile Phone Display with
Interactive communication with user due to programmable keyboard, which changes
its operation on each key press.
7) IC 8255:
This is Intel Launched IC-8255 functionality.
8) Q.P.S.K. Modulator (Analog):
This is a Q.P.S.K. modulator that
modulates digital serial data in analog. This hardware consists of Operational
Amplifier based hardware.