THIS IS FOR INFORMATIONAL PURPOSES ONLY! SILENCERS ARE ILLEGAL AND THIS ONE ONLY MADE FOR INFOMATIONAL PURPOSES.
This silencer is made for a 25mm barrel. You need:
25mm 18PN pipe
25mm coupling
25mm to 50mm coupling x2
50mm 18PN pipe.
First cut the 25mm to the size you want. This one is 35cm long. Then you glue the 25mm coupling to one end. This is the hard part: drill out the stoppers in the 25mm to 50mm coupling. Now grab the 25mm and drill big holes all over the pipe. Try to drill them straight as it will work better. Put one 25mm to 50mm coupling down to the 25mm coupling. Do not glue it as you might want to make ajustments. Cut the 50mm pipe just so you have enough room for the other 50mm to 25mm coupling and so the 25mm pipe fits in the correct hole. Now get some donna stuffing and compress it into the 50mm pipe. Fill it to the top and put the 25mm to 50mm coupling on top. Hammer it down and its ready to use. READ DISCLAIMER |
