Empty can (empty beans can or something like that)
Petrol
Plastic bag
Black Powder
Fuse
Drill bit and Drill(for fuse hole)
Ok, start by drilling a hole 1 cm from the bottom of the can. Then place a 5 inch long piece of fuse in the hole so it goes half way through the can. Then place a 2 cm layer of Black Powder in the can so it cover the fuse. Now take the plastc bag and pour some petrol in it and hold one of the top corners so all the petrol will move to one edge of the plastic bag. Now gently swist and tie the bag just above where the top of the petrol is in the bag.(confused yet??? take a look at the diagram). Now put the little pouch of petrol into the can so it is directly above the layer of Black Powder and strech the very top part of the plastic bag over the top of the can and cellotape it tight so it will remain hanging over the Black Powder. Then put an improvised lid on the can (circle of cardboard with a bit of cellotape holding it so the tin. When complete, place on a flat surface and light the fuse then run like hell and watch as it exploded with a huge fireball, and don't forget to take some pictures of your pyrotechnic devices and send them in for me to put on the website.
