| Enlarged Velocity Screw |
| Materials: 1/4 - 20 Allen Headed Screw Spring Tools: 1/4 - 20 Tap Drill 13/64" Drill Bit How To: Step 1 Disassemble your Samurai, and take everything off of the valve assembly. Step 2 Take out your velocity Screw and velocity spring. Step 3 Drill out the hole where the velocity screw came from, with the 13/64" drill bit. Step 4 Tap the hole you just drilled with the 1/4 - 20 Tap. Step 5 Make sure ALL metal filings are out of your valve assembly, or your gun will leak. Step 6 Get a spring that fits over the screw, this will be your new velocity spring. Step 7 Screw the screw back into your new hole. Put your gun back together, and gas it up to make sure nothing leaks. |