1.5" x 6' x 3/4" piece of wood
Primer
Paint
1" long screws
Tools
Drill press
Round sandpaper drill bits
sand paper
Saw
Screw Driver
Jig Saw
Drill Bits
How To
Step 1
take the piece of wood and cut it to length and width,
Length = 10.5"
Width = 4.25"
Step 2
Draw the shape of the stock you want on the piece of wood, something like This
Step 3
Cut it out with a jig saw, to cut the inside out drill holes on the inside big enough to fit the jigsaw bit into it
Step 4
sand down the edges and the side and the inside with the cyllindrical sanding discs and the use a 200 grit sandpaper over everything.
Step 5
Prime and Paint
Step 6
Drill two holes in the bottom of the stock to attach to the bottom of the handle on the Blade, as seen in the finished product Here