PAGE1

WHEN BUILDING THE "ROBZOOKA", THE MOST IMPORTANT THING YOU HAVE TO REMEMBER
IS THE SIZE. FOR INSTANCE, THE KNUCKLES ON THE HAND ARE THE PORT FIRING WEAPON BALLS FROM THE CHIMERA.

ALL TOGETHER, THE PARTS INCLUDED:

                                                LAND RAIDER LASGUN SPRUE
                                               ORK WARTRAKK (FOR THE HEAD)
                                                2 CHIMERAS
                                               1 BASILISK
                                                2 LEMAN RUSS TANKS
                                               AND OF COURSE ORK CREW MEMBERS AND GLYPHS

LET ME TRY TO BREAK DOWN THE CONSTRUCTION A LITTLE:

                            HEAD:
                                       ORK WARTRAKK MAIN BODY, WITH THE FRONT SECTIONS OF THE
LEMAN RUSS SIDE SKIRTS ATTACHED. THE "EYES" ARE FROM THE LAND RAIDER SPRUE.
THE HEAD IS ATTACHED TO THE BODY USING THE LARGE TANK ROAD WHEELS CONNECTED
LIKE VERTERBRAE (IT LOOKS REALLY COOL), AND THE JAW IS A CHIMERA FLOOR PLATE CUT AND BENT INTO THE SHAPE YOU SEE.

                           BODY FRONT:
                                        INCLUDED THE BASILISK FRONT SHIELD HOLDING THE TWO BENT (WITH A HEAT GUN) CHIMERA SIDE SKIRTS, WITH TWO LEMAN RUSS BATTLECANNONSIN THE SLOTS. THERE IS ALSO AN ARMOR PLATE FROM THE CHIMERA COVERING THE REST OF THE OPEN SLOT FROM THE BASILISK SHIELD. YOU CAN SEE THE "COD-PIECE" IS FROM THE CHIMERA.

                          BODY BACK:
                                       I'M SORRY I DONT HAVE GOOD PICS OF THE BACK, I'LL TRY TO CORRECT THIS AT A LATER DATE...ANY WAY, THE BACK IS THE BASILISK HULL PIECE THAT THE MAIN GUN IS MOUNTED ON, WITH THE EXHAUST PIPES FROM THE LEMAN RUSS ON EITHER SIDE. A CHIMERA FLOOR PLATE WAS USED TO CONNECT THE BASILICK PART TO THE "COD-PIECE". I PUT AN ARMOR DOOR FROM THE CHIMERA IN THE MIDDLE TO GIVE THE ORKS A WAY IN, AND THE LADDER FROM THE BASILISK JUST ABOVE THAT. AND THE SHOULDER PLATFORM IS FROM THE BASILISK.

                          LEGS, FEET:
                                       YOUR GOING TO NEED A TOTAL OF 6 OF THE TRACK GUARDS. TWO PER LEG, AND TWO FOR THE ARMS (1 SET FOR BOTH ARMS). THE LEGS INCLUDED A LARGE ROADWHEEL EACH WITH THE LASGUN FROM THE CHIMERA. THE FEET ARE TWO LEMAN RUSS TURRETS FULLY ASSEMBLED, WITH SPONSON BOLTERS AS THE HEELS (THE BOLTER BARRELS FIT RIGHT INSIDE THE TURRETS). TWO RUSS SPONSONS WERE USED FOR THE "THIGHS"

                          STOMPA CANNON ARM:
                                        EASY, THE ASSEMBLED BASILISK CANNON, WITH THE MAIN BARREL CUT AT THE JUNCTURE, AND RE-GLUED TO THE LOWER SECTION *SEE PIC* ASSEMBLE TWO TRACK GUARDS JUST LIKE FOR THE LEGS AND CUT IT IN HALF. JUST ATTACH THE GUN TO THE CUT END, AN ATTACH THE ARM TO THE POINT JUST UNDER THE BASILISK PLATFORM.

                          RIPPA FIST ARM:
                                        ASSEMBLE THE BASILISK PIECE THAT ATTACHES THE GUN TO THE BODY AND GLUE IT AS SHOWN TO THE OTHER ARM SECTION. THE FIST IS MADE OF TWO CHIMERA TURRETS WITH A STANDARD FIGURE BASE ON TOP. ASSEMBLE 2 SEARCH LIGHTS WITHOUT THE LENS, AND GLUE THREE SMALL ROAD WHEELS AS SHOWN FOR THE CANNON. THE FINGERS ARE THE MOST TIME CONSUMING, CAREFULLY TRIM THE BALLS AWAY FROM THE CHIMERA PORT FIRING WEAPONS, AND GLUE TO SMALL ROAD WHEELS AS SHOWN. ATTACH THE WHOLE ARM JUST LIKE THE OTHER ONE, AND YOUR DONE!

                          I USED AN OLD CD FOR THE BASE, JUST COLLECT ONE OF THE MANY AOL DISKS LYING AROUND.

                                 IT LOOKS GREAT WHEN COMPLETED, AND YOUR THE ENVY OF MEKBOYS EVERYWHERE!

                                                                              [email protected]