HOLDER AM2 CULTITRAC.
MAX HP AT ENGINE CRANKSHAFT: 20 bhp (23 SAE hp) at 2,300 engine rpm.
MAX HP AT PTO SHAFT: 17.7 (615 rpm) at 2,300 engine rpm.
MAX CRANKSHAFT TORQUE: 43 lb ft at 2,150 engine rpm.
ENGINE: Holder HD-2, 2-stroke, Direct injection, Water-cooled diesel, Cylinders
= 2, Bore = 3.307 in. Stroke = 3.500 in. Displacement = 61 cu. in. Compression
ratio = 18: 1, Operating speed range = 800 to 2,400 rpm.
TRANSMISSION: Type = Drive from gearbox, through prop. Shaft to rear diff, and
returned to front axle via twin prop shafts.
STANDARD SPEEDS: Forward = 0.81, 1.30, 2.48, 3.88, 6.20, 12.12 mph, reverse =
0.81, 1.30, 2.48 mph, on 6.00 x 16 AS rear tires.
STANDARD TIRES: Front = 7.00-16 AS, Rear = 7.00-16 AS.
TURNING RADIUS: 5 ft 6 in. Ground clearance = 9 in.
OVERALL DIMENSIONS: Length = 95 in. Width = 30 to 39 in. Height (to top of
radiator) = 40 in. Tread, Front = 24 to 33 in. Rear = 24 to 33 in. Wheelbase =
44 in.
WEIGHT (as sold, without ballast): 1,760 lb.
BELT PULLEY: Diameter = 8.2 in. Width = 4.7 in. Speeds = 1,520 rpm at 2,300
engine rpm.
PTO: Spline shaft diameter 1-3/8 in. Height above ground, standard tires = 16
in. End of shaft 29-1/2 in. ahead of drawbar pin, Shaft central between wheels,
Rotation = clockwise, viewed from rear.
HYDRAULICS: Max pressure = 2,489 psi, Pump capacity = 2.4 gpm.
IMPLEMENT ATTACHMENT: Category 2 linkage, Max lift at hitch point = 3,080 lb.
ADDITIONAL EQUIPMENT AVAILABLE: Rotary cultivators, Ploughs and spray equipment.
