HOLDER AG3 FOUR-WHEEL-DRIVE
MAX HP AT ENGINE CRANKSHAFT: 30 bhp (34 SAE hp) at 2,300 engine rpm.
MAX HP AT PTO SHAFT: 26.7 (615 rpm) at 2,300 engine rpm.
MAX CRANKSHAFT TORQUE: 61.5 lb-ft at 2,100 engine rpm.
ENGINE: Holder HD-3, 2-stroke, Direct injection, Water-cooled diesel, cylinders
= 3, Bore = 3.307 in. Stroke = 3.500 in. Displacement = 91.5 cu. in. Compression
ratio = 18:1, Operating speed range = 800 to 2,400 rpm.
STANDARD TIRES: Front = 7.50 x 18 AS, Rear = 7.50 x 18 AS.
TURNING RADIUS: 6 ft 11 in. Ground clearance = 10 in.
OVERALL DIMENSIONS: Length = 102 in. Width 31 to 43 in. Height (to top of
radiator) = 42 in. Tread, Front = 24 to 33 in. Rear = 24 to 33 in. Wheelbase =
44 in.
WEIGHT (as sold, without ballast): 2,145 lb.
BELT PULLEY: Diameter 8.2 in. Width = 4.7 in. Speeds = 1,520 rpm at 2,300 engine
rpm.
PTO: Spline shaft diameter 1-3/8in. Height above ground with standard tires = 17
in. End of shaft = 29-1/2 in. ahead of drawbar pin, Shaft central between
wheels, rotation is clockwise, viewed from rear.
NOTE: Other specifications same as AM2 model. Alternately available with
Hydromatic power steering.
