CHAMBERLAIN CANELANDER
OFFICIAL TEST NO: Not yet tested (manufacturer's figures).
HORSEPOWER: Max. Belt = 48, max, drawbar = 45
ENGINE: Type-vertical in-line 4-strok@ diesel; overhead valves; 4-cylinder, bore
= 4.250 in.; stroke = 4.750 in.; compression ratio = 16:1; rated speed
1,600/1,800.rpmi
STANDARD TIRES: Front-7.50 x 18; rear-12 x 38.
STANDARD SPEEDS: (with standard tires): Forward = 1.9, 2.3, 3.2, 3.8, .4.8, 5.8,
7.5, 12.7, 19,4 mph; reverse = 2.5, 3.10 mph.
GROUND CLEARANCE: 26 in.
OVERALL DIMENSIONS: Height (to top of radiator) = 70 in.; width = 741 in.
(max.); length = 143 in.; wheelbase = 95 in.; track, front 57 in., rear 55,
58/1/4, 61/1/2 in.
WEIGHT: 6,850 lb with fuel, oil, coolant water.
BELT PULLEY: Diameter 10/1/4 in.; width = 61 in.; speeds = 1, 188 rpm.
PTO: 1/3/8 in. spline shaft; 540 rpm. Height above ground level with standard
tyres-30R in. End of shaft 9/1/8 in. ahead of drawbar pin. Shaft 1/3/8 in.
right, of centre. Direction of rotation = clockwise viewed from rear.
ELECTRICAL SYSTEM: 12 volts.
HYDRAULIC SYSTEM: Working pressure-1, 500 psi; pump capacity-7.1 gpm.
IMPLEMENT MOUNTING: Category 1 or 2; 3-point linkage.
