P S Metal Works Co., Ltd.

Production Size Range

THICKNESS		OUTSIDE DIAMETER
INCH		1/4	3/8	1/2	3/4	1	1.1/4	1.1/2	2	2.1/2	2.3/4
	MM.	6	10	15	20	25	30	40	50	60	70
0.016	0.40
0.020	0.50
0.024	0.60
0.032	0.80
0.040	1.00
0.048	1.20
0.060	1.50
0.080	2.00
0.100	2.50
0.120	3.00
0.140	3.50

Seamless Brass Tubes are available in the following tempers, size-range and specifications:
O = Soft anneal OL = Light anneal 1/2H = Half hard H = Hard

Standard Classification and Designation

JIS STANDARD				POPULAR NAME	U.S.A.		GERMANY
ALLOY NO.	SHAPE	CLASS	DESIGNATION	POPULAR NAME	C.D.A.	ASTM	DIN
C1220	TUBE	COMMON GRADE SPECIAL GRADE	C1220T C1220TS	PHOSPHORUS- DEOXIDIZED COPPER	122	C12200	SFCu
C2200	TUBE	COMMON GRADE SPECIAL GRADE	C2200T C2200TS	RED BRASS	220	C22000 (B135)	CuZn10
C2300	TUBE	COMMON GRADE SPECIAL GRADE	C2300T C2300TS	RED BRASS	230	C23000 (B135)	CuZn15
C2400	TUBE	COMMON GRADE SPECIAL GRADE	C2400T C2400TS	RED BRASS	240	C24000 (B135)	CuZn20
C2600	TUBE	COMMON GRADE SPECIAL GRADE	C2600T C2600TS	BRASS	260	C26000 (B135)	CuZN30
C2700	TUBE	COMMON GRADE SPECIAL GRADE	C2700T C2700TS	BRASS	270	C27000 (B135)	CuZn36
C2720	TUBE	COMMON GRADE SPECIAL GRADE	C2720T C2720TS	BRASS	272	C27200 (B135)	CuZn37

Chemical Composition

CLASS	CHEMICAL COMPOSITION %
CLASS	Cu	Pb	Fe	Sn	Zn	AI	As	Mn	Ni	P	Si	Other
C1220	99.90min.	-	-	-	-	-	-	-	-	0.015-0.040	-	-
C2200	89.0-91.0	0.05 max.	0.05 max.	-	Residual	-	-	-	-	-	-	-
C2300	84.0-86.0	0.05 max.	0.05 max.	-	Residual	-	-	-	-	-	-	-
C2400	78.5-81.5	0.05 max.	0.05 max.	-	Residual	-	-	-	-	-	-	-
C2600	68.5-71.5	0.05 max.	0.05 max.	-	Residual	-	-	-	-	-	-	-
C2700	63.0-67.0	0.05 max.	0.05 max.	-	Residual	-	-	-	-	-	-	-
C2720	62.0-65.0	0.07 max.	0.07 max.	-	Residual	-	-	-	-	-	-	-

Remark:

1. All the size-range and specifications are subject to change without notice
2. Tolerances applicable to JIS, ASTM and DIN standard

Mechanical Properties

Alloy No.	Temper grade	Designation	Tensile Test				Hardness Test
			Outside Dia. mm.	Wall Thickness mm.	Tensile Stregth N/mm2	Elongation %	Wall Thinkness mm.	Rockwell Hardness
								HR 30 T	HR15 T	HRF
C1220	O	C1220 T-O C1220 TS-O	4 & over, up to & incl. 250	0.25 & over, up to & incl. 30	205 min.	40 min.	0.6 min.	-	60 max.	50 max.

	OL	C1220 T-OL C1220 TS-OL	4 & over, up to & incl. 250	0.25 & over, up to & incl. 30	205 min.	40 min.	0.6 min.	-	65 max.	55 max.

	1/2H	C1220 T-1/2H C1220 TS-1/2H	4 & over, up to & incl. 250	0.25 & over, up to & incl. 25	245 to 325	-	-	30 to 60	-	-

	H	C1220 T-H C1220 TS-H	Up to & incl. 25	0.25 & over, up to & incl. 3	315 min.	-	-	55 min.	-	-

			Over 25, up to & incl. 50	0.9 & over, up to & incl. 4				-	-	-

			Over 50, up to & incl. 100	1.5 & over, up to & incl. 6				-	-	-

			Over 100, up to & incl. 200	2 & over, up to & incl. 6	275 min.	-	-	-	-	-

			Over 200, up to & incl. 350	3 & over, up to & incl. 8	255 min.	-	-	-	-	-

C2200	O	C2200 T-O C2200 TS-O	10 & over, up to & incl. 150	0 5 & over, up to & incl. 15	225 min.	35 min.	Up to & incl. 1.1	30 max.	-	-
							Over 1.1	-	-	70 max.
	OL	C2200 T-OL C2200 TS-0L	10 & over, up to & incl. 150	0.5 & over, up to & incl. 15	225 min.	35 min.	Up to & incl. 1.1	37 max.
							Over 1.1			78 max.
	1/2H	C2200 T-1/2H C2200 TS-1/2H	10 & over, up to & incl. 150	0.5 & over, up to & incl. 6	275 min.	15 min.	-	38 min.	-	-

	H	C2200 T-H C2200 TS-H	10 & over, up to & incl. 100	0.5 & over, up to & incl. 6	365 min.	-	Over 0.5, up to & incl. 6	55 min.	-	-

C2300	O	C2300 T-O C2300 TS-O	10 & over, up to & incl. 150	0.5 & over, up to & incl. 15	275 min.	35 min.	Up to & incl. 1.1	36 max.	-	-
							Over 1.1	-	-	75 max.
	OL	C2300 T-OL C2300 TS-OL	10 & over, up to & incl. 150	0-5 & over, up to & incl. 15	275 min.	35 min.	Up to & incl. 1.1	39 max.	-	-
							Over 1.1	-	-	85 max.
	1/2H	C2300 T-1/2H C2300 TS-1/2H	10 & over, up to & incl. 150	0.5 & over, up to & incl. 6	305 min.	20 min.	-	43 min.	-	-

	H	C2300 T-H C2300 TS-H	10 & over, up to & incl. 100	0.5 & over, up to & incl. 6	390 min.	-	Over 0.5, up to & incl. 6	65 min.	-	-

C2600	O	C2600 T-O C2600 TS-O	4 & over, up to & incl. 250	0.3 & over, up to & incl. 15	275 min.	45 min.	Up to & incl. 0.8	40 max.	-	-
							Over 0.8	-	-	80 max.
	OL	C2600 T-OL C2600 TS-OL	4 & over, up to & incl. 250	0.3 & over, up to & incl. 15	275 min.	45 min.	Up to & incl. 0.8	60 max.	-	-
							Over 0.8	-	-	90 max.
	1/2H	C2600 T-1/2H C2600 TS-1/2H	4 & over, up to & incl. 100	0.3 & over, up to & incl. 6	375 min.	20 min.	-	53 min.	-	-

			Over 100, up to & incl. 250	2.0 & over, up to & incl. 10	355 min.

	H	C2600 T-H C2600 TS-H	4 & over, up to & incl. 100	0.3 & over, up to & incl. 6	450 min.	-	Over 0.5, up to & incl. 6	70 min.	-	-

			Over 100, up to & incl. 250	2.0 & over, up to & incl. 10	390 min.

C2700 & C2720	O	C2700 T-O C2700 TS-O	4 & over, up to & incl. 250	0.3 & over, up to & incl. 15	295 min.	40 min.	Up to & incl. 0.8	40 max.	-	-
							Over 0.8	-	-	80 max.
	OL	C2700 T-OL C2700 TS-OL	4 & over, up to & incl. 250	0.3 & over, up to & incl. 15	295 min.	40 min.	Up to & incl. 0.8	60 max.	-	-
							Over 0.8	-	-	90 max.
	1/2H	C2700 T-1/2H C2700 TS-1/2H	4 & over, up to & incl. 100	0.3 & over, up to & incl. 6	375 min.	20 min.	-	53 min.	-	-

			Over 100, up to & incl. 250	2.0 & over, up to & incl. 10	355 min.

	H	C2700 T-H C2700 TS-H	4 & over, up to & incl. 100	0.3 & over, up to & incl. 6	450 min.	-	Over 0.5, up to & incl. 6	70 min.	-	-

			Over 100, up to & incl. 250	2.0 & over, up to & incl. 10	390 min.

Dimensions, Weights, and Tolerances in Diameter and Wall Thickness for
Nominal or Standard Copper Water Tube To ASTM B88
(All tolerances are plus and minus except as otherwise indicated)

Nominal or Standard Size, in.	Outside Dia., in.	Avg. Outside Dia. Tolerance, in.		Wall Thickness and tolerances, in.						Theoretical Weight, lb/ft
		Avg. Outside Dia. Tolerance, in.		Type K		Type L		Type M		Theoretical Weight, lb/ft
		Annealed	Drawn	Wall Thickness	Tolerance	Wall Thickness	Tolerance	Wall Thickness	Tolerance	Type K	Type L	Type M
1/4	0.375	0.002	0.001	0.035	0.0035	0.030	0.003	C	C	0.145	0.126	C
3/8	0.500	0.0025	0.001	0.049	0.005	0.035	0.004	0.025	0.002	0.269	0.198	0.145
1/2	0.625	0.0025	0.001	0.049	0.005	0.040	0.004	0.028	0.003	0.344	0.285	0.204
5/8	0.750	0.0025	0.001	0.049	0.005	0.042	0.004	C	C	0.418	0.362	C
3/4	0.875	0.003	0.001	0.065	0.006	0.045	0.004	0.032	0.003	0.641	0.455	0.328
1	1.125	0.0035	0.0015	0.065	0.006	0.050	0.005	0.035	0.004	0.839	0.655	0.465
1 1/4	1.375	0.004	0.0015	0.065	0.006	0.055	0.006	0.042	0.004	1.04	0.884	0.682
1 1/2	1.625	0.0045	0.002	0.072	0.007	0.060	0.006	0.049	0.005	1.35	1.14	0.940
2	2.125	0.005	0.002	0.083	0.008	0.070	0.007	0.058	0.006	2.06	1.75	1.46
2 1/2	2.625	0.005	0.002	0.095	0.010	0.080	0.008	0.065	0.006	2.93	2.48	2.03
3	3.125	0.005	0.002	0.109	0.011	0.090	0.009	0.072	0.007	4.00	3.33	2.68

Nominal Outside Diameters and Thicknesses
BS EN 1057

Dimensions in millimeters

Nominal
Outside
Diameter

Nominal wall thickness e

0.5

0.6

0.7

0.8

0.9

1.1

1.2

1.5

2.5

66.7

76.1

R indicates the European recommended dimensions
X indicates other European dimensions

...........................................................................................

Hosted by www.Geocities.ws