PS Arms
PO Box 798
Easton PA 18044-0798

Email: [email protected]
U.S. Voice Mail/Fax: 484-545-4343

05/01/2009

Description

Cost

*

 Indicates Out of Stock but may be available in the future.  N/A indicates that item is no longer available.

Sterling Post '86 Dealer Samples:**  (original, not remanufactured). Magazine and user manual  included. 

  Mk4 SMG, folding stock, wrinkle finish, new

$1,495

  Mk4 SMG, folding stock, wrinkle finish, used, good-very good condition

$795

  Sterling Mk5 Silent SMG, new, folding stock, wrinkle finish, w/ scope rail mounting studs, Picture w/stock closed, Picture w/stock open

$1,495

  Mk5 Silent SMG, fixed plastic buttstock, flat black finish, w/o scope rail studs (Rare only 12 Mk5 made with fixed butt)

$2,695

  Mk7A4 Para SMG (4" barrel), wrinkle finish (Rare only 300 Mk7s made for SAS and Special Ops)

$999

  Mk7A8 Para SMG (8" barrel), wrinkle finish (Rare only 300 Mk7s made for SAS and Special Ops)

$999

  Mk7A4 or Mk7A8 Para SMG with detachable plastic stock (PDW version)

$1,199

Sterling Pre '86 Dealer Samples:** (original, not remanufactured). Magazine and user manual  included. 

  Mk8 CBS, (short barreled rifle), folding stock, wrinkle finish, scope rail studs (Rare Only 80 Made)

$2,695

Sterling Magazines: (fit SMGs and 9mm semi-autos) 

*

  10 rd.

N/A

  15 rd.

$85

  34 rd., original – Original Sterling Manufacture - not British military contractor manufacture

$75

  68 rd., (twin stack 34 rd. magazine)

$125

*

  30 rd., (twin stack 15 rd. magazine)

$125

  20 rd., (twin stack 10 rd. magazine)

$125

Sterling Manuals: 

  Mk4 User

$20

*

  Mk4 Spares

$15

  Mk5 User

$20

Sterling Accessories: 

  Scope Rail 12mm (fits 9mm guns with scope rail mounting studs only) – does not include rings

$60

  Scope Rail 20mm (fits 9mm guns with scope rail mounting studs only) – does not include rings

$65

*

  Scope rail mounting stud set (2).  Must be brazed to receiver.  Original.

N/A

  Sling, Mk4, Mk5, Mk6, Mk8

$15

  Sling, Mk4, Mk5, Mk6, Mk8, when purchased with a User or Spares Manual

$10

$10

  Foregrip Strap, Mk7.

$15

  Front Sight Zero Tool, Mk4, Mk6, Mk8 (in wood case)

$195

*

  Front Sight Zero Tool, Mk5 (in wood case)

$195

*

 Armourers Kit, Mk5 (original except alignment rod is new manufacture)

$475

*

Sterling Mk7A Para SMG Parts Kit: (rare only 300 Mk7s made for SAS and Special Ops)
Complete factory new parts set: barrel, complete trigger group, complete bolt assembly with handle & extractor; recoil springs, spring cup, plastic pistol grip, vertical foregrip, magazine catch, screw & spring; ejector & screw and rare 15 rd magazine.  Includes receiver parts (mag well, pistol frame, front casing, rear casing with special rear sight).   Note:  Mk7 Parts Kits are special order only.  Call for details.

N/A

*

  Mk7A Para SMG Kit As above with plastic stock and special end cap for mounting stock (PDW version)

N/A

Sterling Mk4 SMG Spares: (most fit all Sterling SMGs and 9mm semi-autos)

  Barrel, Mk4 (British proof marks), new in wrap

$495

*

  Bolt with extractor assembly, cocking handle block plunger and spring, Mk4, Mk7A8 (does not include cocking handle)

$115

*

  Bolt Assembly with extractor, cocking handle block, outer and inner recoil springs, and spring cup (does not include cocking handle), Mk4, Mk7A8

$149

*

  Cocking Handle

$26

  Cocking Handle Block, Mk4, Mk7A8

$18

  Recoil Springs, outer and inner bolt return, Mk4, Mk5, Mk7A

$20

  Recoil Spring, Cup, Mk4, Mk5, Mk7A

$18

  Recoil Springs, outer and inner bolt return, with spring cup, Mk4, Mk5, Mk7A

$30

  Extractor with spring & plunger, fits all Sterling SMGs and 9mm semi-autos

$38

  Extractor Only (no pin, plunger or spring), fits all Sterling SMGs and 9mm semi-autos

$25

*

  Spring & Plunger for extractor, fits all Sterling SMGs and 9mm semi-autos

$15

  Ejector, fits all Sterling Marks

$22

*

  Folding Stock with trunion, Mk4, Mk5, Mk6, Mk8

N/A

  Folding Stock without trunion, Mk4, Mk5, Mk6, Mk8

$95

  Magazine Catch assembly (catch, screw & spring), fits all Sterling SMGs and 9mm semi-autos

$38

  Pistol Grip, plastic, dated 1984-1986, fits all Sterling SMGs and 9mm semi-autos,  new

$55

$65

*

  Rear End Cap, Mk4, Mk6, Mk8

$45

*

  Rear End Cap, used, Mk4, Mk6, Mk8

$8

*

  Rear End Cap, Mk5 (has buffer to reduce impact on locking lugs), fits all folding stock versions - SMGs and 9mm semi-autos

$65

  Rear End Cap, used, Mk3 (will fit Mk4, Mk6, Mk8) (smooth finish, missing sling loop, condition poor)

$5

  Rear End Cap Lever assembly, fits all Sterling SMGs and 9mm semi-autos

$25

  Trigger Group, Mk3, rare, also fits Mk4, Mk5, Mk7A, complete unit including trigger guard

$145

*

  Trigger Group, Mk4, also fits Mk3, Mk5, Mk7A, complete unit including trigger guard

$165

  Trigger Group Retention Pin & spring, fits all Sterling SMGs and 9mm semi-autos

$15

  Trigger Group Retention Pin & spring (if purchased with any trigger group)

$10

        SMG Trigger Group Parts: (fit Mk4, Mk5, Mk7A)

*

      Sear

$40

      Sear & Trigger Pin (two pin pair)

$5

      Sear Cradle with spring

$30

      Trigger

$30

      Trigger/Sear Spring & Plunger (sold only with sear or trigger)

$8

      Trigger Guard, wrinkle finish

$22

*

      Trigger Guard Pin

$2

      Trip Lever w/pin

$29

Sterling Mk7A Para SMG (A4=4" barrel, A8=8" barrel,  all except bolt will fit Mk7C semi-auto Para Pistol) .  Rare only 300 made for Special Ops:

*

  Barrel 4" or 8", Mk7 (British proof marks)

N/A

  Barrel Nut

$15

  Bolt with extractor assembly, Mk7A8 (same as Mk4)

*

  Bolt with extractor assembly, Mk7A4 (modified Mk7A8 bolt)

$125

  Foresight assembly, complete

$25

*

  Plastic Stock with special end cap for mounting stock (converts Mk7 Para SMG or pistol to PDW

$250

*

  Plastic Stock , stripped (no spacer, butt plate or mounting pin)

$145

  Plastic Stock butt spacers (use to lengthen stock)

$15

*

  Rear End Cap, Mk7A4 (has buffer to reduce impact on locking lugs)

$45

*

  Rear End Cap, Mk7A8, Mk7C4, Mk7C8

$40

  Foregrip Strap

$15

*

  Vertical Foregrip, with screw and mounting plate. New manufactured copy of original

$45

Sterling Mk5 Silent SMG:

 *

  Rear End Cap, Mk5 (has buffer to reduce impact on locking lugs), fits all folding stock Sterlings

$65

  Wood Foregrip, Mk5 (no metal attaching band)

$43

Sterling Mk6 Semi-Auto Carbine:  (some parts fit Mk7C semi-auto Para Pistol and Mk8 SBR)

*

  Barrel, 16", Mk6 (British proof marks)

N/A

*

  Barrel Nut, Mk6

N/A

*

  Bolt Assembly with extractor, firing pin and firing pin spring, Mk6, Mk7C, Mk8

$115

*

  Bolt Assembly with extractor, firing pin, firing pin spring, firing pin block, outer and inner recoil springs, spring cup, and bolt handle, Mk6, Mk7C, Mk8

$149

*

  Bolt Handle, Mk6, Mk7C, Mk8

N/A

  Recoil Spring, outer (large), Mk6, Mk7C, Mk8

$15

$20

  Recoil Spring, Cup, Mk6, Mk7C, Mk8

$18

*

  Firing Pin and Firing Pin Spring, Mk6, Mk7C, Mk8

$50

  Firing Pin Block, Mk6, Mk7C, Mk8

$18

*

  Trigger Group, Mk6, also fits Mk7C, Mk8

$165

*

Closed Bolt Kit, Includes trigger group & complete bolt assembly with recoil springs, spring cup & bolt handle for Mk6, Mk7C, Mk8.  Can also be used to convert Mk4 or Mk5 SMGs to the rare closed bolt semi-auto Police Carbine.

$295

         Semi-Auto Trigger Group Parts: (fit Mk6, Mk7C, Mk8) 

      Sear

$35

      Sear Cradle

$25