PROJECT 20V SILVERTOP NOS
My Car has shIt itself once again TIME FOR A NEW ENGINE!!!!!!!!! should i fit a 4a-GZE or a 4A-GE 20V blacktop? NO coz it cost to much for the GTZ engine and the blacktop has a few differences to the 20V silvertop beside the LOOM, so its going to be cheaper to get another enigne compatable with my loom e.f.i. set up e.t.c.

1ST: i brought a new gearbox reason: coz mines stuffed and the syncros are gone in most of the gears

2nd: Got Iridium Spark plugs, NKG 5mm ht leads, MSD blaster 2 coil, K&N air filter, Redline oil breather filter, exhuast 4:2:1 extractors with 2 1/2 inch pipeing straight threw- for new engine.


3RD: haven't got the engine or money at the moment so i'll list the thing to be done or considered for this engine

20V silvertop
blacktop induction and intake including injectors..
port on intake side of head
lighten flywheel to 6kg
buy NOS and install NOS
replace the head gasket
replace the rings
USE 10W/40W oil in engine
use 70W/90W gearbox oil in gearbox
change oil filter and fuel filters
replace seals and gaskets as found to be needed
change cambelt
change pipeing from afm to plentium from plastic to metal
(Maybes for now)
do cams and cam pullys
possably get a new computer (LINK managment)
get new pistons eaither HPC power coated OR forged 11:1 pistons
Raise compression to 11:1
BACK
Hosted by www.Geocities.ws

1