embeddedskillset

Our expertise can be divided into Hard ware and Software design

ProSys Embedded offers a variety of Hardware Design Services. Our design engineers are skilled in:

¨ PCB Layout and Routing.

¨ Electronic Circuit Design.

¨ Board Design.

¨ Prototype Testing.

¨ Chip count reduction and optimization.

¨ Timing analysis at board level.

¨ Netlist verification.

¨ Tapeout process (Gerber file, PADS, Fab drawings, etc).

Steps leading to hardware design:
1. We analyze the customer's hardware requirement with respect to costing, space constraints, availability of components including lead time and typical component failure rate.
2. We also ask for a list of common inventory parts with the customer so that we may utilize the same within our design, if possible.
3. Next we undertake hardware design using Schematic Design Tool. The schematic is drawn up based on the specifications provided.
4. Next a prototype of the hardware is built using standard general purpose boards. For more complex designs, a special PCB is designed and built primarily for prototype purposes.

ProSys Embedded offers a variety of Software Design Services. Our design engineers are skilled in:

¨ Embedded software

¨ Protocol Stacks

¨ Algorithm development

¨ Application development

¨ Board support packages

¨ Boot-loaders

¨ Device driver development

¨ Linux, uCLinux, RTLinux

¨ RTOS

¨ WinCE, WindowsXP, .NET, Visual Basic®

¨ Embedded Processors/Micro-Controllers

¨ TI DSP/BIOS™

¨ GUI design

Steps leading to software development.
1. We analyze the customer's software features and the operational logic provided. We recommend that a flowchart be generated by the customer so that the operational logic is clarified. However, if the flowchart is not provided, we generate a flowchart which is given to the customer to verify. Most of the time, this is done in a joint meeting with the customer and our team of engineers.
2. Based on the flowchart the preliminary software is generated. Care is taken to implement all cross functional modules to prevent software bugs.
3. Next, interface drivers to hardware modules are written and tested with the prototype hardware.
4. Finally the software drivers are integrated with the main loop and tested for functionality.

ProSys Embedded, professionals specialize and utilize their expertise in the following programming languages, cpu and controllers, Firmware and tools: