*********

Welcome to Project 64!

The goal of Project 64 is to preserve Commodore 64 related documents
in electronic text format that might otherwise cease to exist with the
rapid advancement of computer technology and declining interest in 8-
bit computers on the part of the general population. If you would like
to help by converting C64 related hardcopy documents to electronic
texts please contact the manager of Project 64, Cris Berneburg, at
74171.2136@compuserve.com.

Extensive efforts were made to preserve the contents of the original
document.  However, certain portions, such as diagrams, program
listings, and indexes may have been either altered or sacrificed due
to the limitations of plain vanilla text.  Diagrams may have been
eliminated where ASCII-art was not feasible.  Program listings may be
missing display codes where substitutions were not possible.  Tables
of contents and indexes may have been changed from page number
references to section number references. Please accept our apologies
for these limitations, alterations, and possible omissions.

Document names are limited to the 8.3 file convention of DOS. The
first characters of the file name are an abbreviation of the original
document name. The version number of the etext follows next. After
that a letter may appear to indicate the particular source of the
document. Finally, the document is given a .TXT extension.

The author(s) of the original document and members of Project 64 make
no representations about the accuracy or suitability of this material
for any purpose.  This etext is provided "as-is".  Please refer to the
warantee of the original document, if any, that may included in this
etext.  No other warantees, express or implied, are made to you as to
the etext or any medium it may be on.  Neither the author(s) nor the
members of Project 64 will assume liability for damages either from
the direct or indirect use of this etext or from the distribution of
or modification to this etext.

*********

The Project 64 etext of the Easy Script 64 Quick Reference
Card. Converted to etext by by "Frank" Jeno E. Kontros
<jeno@kontr.uzhgorod.ua>, the Non Stop Cracker.

EASYQR10.TXT, September 1996, etext #78.

*********

EASY SCRIPT 64 QUICK REFERENCE CARD
===================================
'-' means pressed keys one after other.
'+' means pressing keys simultaneously.

MODES:
------
EDIT     On/Off..............F1
SOUND    On/Off..............F1-*
DISK.........................F4
    DISPLAY DIRECTORY........$
    LOAD DIRECTORY...........+$
    DELETE FILE .............s:filename
RESTART PROGRAM..............F1-RUN/STOP

CURSOR CONTROLS:
----------------
RIGHT........................CRSR <==>
LEFT.........................SHIFT+CRSR <==>
DOWN.........................CRSR ^
UP...........................SHIFT+CRSR ^
UP A LINE....................<= (backarrow)
START OF LINE................<=-CRSR <==>

DISPLAY:
--------
NEXT SCREEN..................F1-SPACE
PERVIOUS SCREEN..............F1-SHIFT+SPACE

GO TO:
------
START OF FILE................SHIFT+CLR/HOME
HOME.........................CLR/HOME
END OF TEXT..................F1-G-E
LINE xxx.....................F1-G-xxx
MAX. LINE NUMBER.............F1-G-999

PANNING:
--------
UP...........................F1-SHIFT+CRSR ^
DOWN.........................F1-CRSR ^
LEFT.........................F1-SHIFT+CRSR <==>
RIGHT........................F1-CRSR <==>
STOP.........................RUN/STOP
SPEED UP.....................SHIFT
HOLD/RESTART.................TAP SPACE BAR

TEXT:
-----
DELETE   CHARACTERS..........INST/DEL
         LINES...............F1-INST/DEL (F1 Off)
         BLOCK...............F1-D-CRSR-(RETURN)
ERASE    CHARACTER...........SPACE
         SENTENCE............F1-E-S
         PARAGRAPH...........F1-E-P
         REMAINDER...........F1-E-R
         ALL.................F1-E-A
INSERT   SPACE...............SHIFT+INST/DEL
         BLANK LINES.........F1-SHIFT+INST/DEL (F1 Off)
         MODE................F1-I (F1-I Off)
RANGE    MARK BLOCK..........F1-R-CRSR-(RETURN)
         TRANSFER............F1-X
         REPEAT (AGAIN)......F1-A
         SAVE BLOCK..........F1-SHIFT+F-blockname
SEARCH   SPECIFY.............F1-S
         REPLACE.............F1-@-M or L
         HUNT................F1-H-M or L
SOFT HYPHEN..................F1-.
LINKING SPACE................SHIFT+SPACE
HORIZONTAL TABS  SET.........Position cursor F1-T-H
                 GO TO TAB...F7
                 CLEAR.......Position cursor F1-C-H
                 ZERO ALL....F1-Z-H
VERTICAL TABS    SET.........Position cursor F1-T-V
                 GO TO TAB...F8
                 CLEAR.......Position cursor F1-C-V
                 ZERO ALL....F1-Z-V
DECIMAL TABS (SET)...........Position cursor F6-F1-T-H-F6
DISPLAY TABS.................F1-P

FILES:
------
LOAD.........................F1-L-filename
SAVE.........................F1-F-filename
MERGE........................F1-I-F1-L-filename

FILL FILES:
-----------
VARIABLE BLOCK...............F1-B
MEASURED BLOCK...............F1-B-CRSR<=-F1-M
FILL BLOCKS FROM CURSOR......F1-V
EMPTY BLOCKS.................F1-SHIFT+V
GO TO NEXT BLOCKS............F1-F7
CLOSE FILL FILE..............F1-CLR/HOME
PRINT,BLOCKS FILLED..........F1-O-F-C-P-filename

OUT PUT:
--------
TO VIDEO OR PRINTER..........F1-O-V or P
CONTINOUS....................F1-O-C-V or P
WITH FILL FILE...............F1-O-F-V or P
WITH LINKED FILES............F1-O-L-V or P
MULTIPLE COPIES..............F1-O-X-#(RETURN)-P
STOP.........................RUN/STOP
AT END OF PAGE
       NEXT PAGE.............C
       CHANGE, VIDEO/PRINT...V or P
       CHANGE TO CONTINOUS...SHIFT+P

PRINT FORMAT:
-------------
UNDERLINE OR ENHANCE.........F1-[ (F1-] Off)
REVERSE FIELD................F1-( (F1-) Off)

FORMAT COMMANDS
---------------
REVERSE FIELD ASTERISK.......F3
COMMAND SEPARATOR............:
TEXT SEPARATOR...............;
COMMENT......................nb
PAUSE DURING PRINT...........ps
JUSTIFICATION................ju1 (ju0 Off)
CENTERING....................cn1 (cn0 Off)
RIGHT ALIGNMENT..............ra1 (ra0 Off)
LEFT MARGIN..................lmxx
RIGHT MARGIN.................rmxx
MARGIN RELEASE...............maxx
PRINTER OFFSET...............ofxx
PAPER LENGTH.................plxx
TEXT LENGTH..................tlxx
LINE SPACING.................spxx
VERTICAL POSITIONING.........vpxx (vp0 Off)
FORCED PAGE..................fp0
FORCED PAGE(CONDITIONAL).....fpxx
PITCH........................ptxx
LINES PER INCH...............lpxx
HEADING......................hdxx:text,,
FOOTING......................ftxx:text,,
PAGE NUMBER..................p#xx
PAGE NO IN HEADINGS..........hdxx:text,,Page;#
PAGE NO IN FOOTINGS..........ftxx:,Page;#
HEADING/FOOTING MARGINS......hlxx:hrxx

*********

End of the Project 64 etext of the Easy Script 64 Quick Reference Card.

*********
