exhaustinstall

Tools needed:

3/8 ratchet
14mm socket
14mm wrench
17mm socket
17mm wrench
Hydraulic Jack
Two Jackstands

First jack the car up and place a jack just in front of the rear wheel on either side of the car. Once you have secured the car up in the air. There are 14mm (2) 14mm nut and bolt combo on either side ot the rear of the cat. Then follow the exhaust pipe back til you get to the next set of nut and bolt combo. Then you go to the muffler and that is held on with a set of 17mm nut and bolts combo. Use the wrench to hold one side while you use the ratched to loosen the other side.