Barker Aircraft Research Company
                       
Welcome to the BARC Powertug  Webpage
This site has moved:
Go to:
www.barkeraircraft.com
Mooney Power Tug
When was the last time you had to get your Mooney into the hanger by yourself? Yes, it can be done, but it can also be a back wrenching job if the ramp apron has even a small slope away from to hanger threshold to preclude flooding.  The M03 Powertug is the minature superhero that will provide the back saving assistence everyone  appreciates.

Unique "
powered" mount and dismount.

Small and light only
7 pounds! You can take it with you.

No battery!  Electrical power is supplied by the Mooney electrical bus via a connector* mounted deep n the passenger side cabin air intake vent.
* Mating Power interface  connector is included.

Chain drive (No fricton roller to tear up nosewheel tire.)
M03 Powertug Installed on Mooney 231
M20K
Position  Tug
Behind Mooney  Axle
   Pulse Power  (Forward to Mount and Reverse to dismount) Insert  Guidebar
"Powered" Load / Unload Sequence
Simply position the Powertug behind the Mooney nosewheel axle and pulse the Forward power control. The Powertug will crawl under the axle and lift it into the Powertug saddle.
Insert the Guide bar handle and your are ready to roll.

The Power Tug  Towbar handle is supplied with a control cable and a 
Forward/ Off / Reverse direction Switch.
Power Tug  mating connector & circuit breaker  Installs in right seat passanger air intake vent.
Connector Installed in deep recess of right side air intake vent.
Guidebar T handle with
Forward / Reverse
Direction Thumbswitch
Price $650

Payment methods:  Personal Check ,
Credit Cards  Visa or Mastercard via Paypal
Go to http://
www.paypal.com

BARC
Skymeadow Airpark
5313 S. Skymeadow, Greenacres, WA 99016
Phone  509 921 8980

email 
[email protected]
Hosted by www.Geocities.ws

1