CURRICULUM
VITAE
Name : Poh Michael H K
Address : 211,Yishun Street 21,#02-03,
Singapore 760211
Telephone: -
Handphone: (65) 9 815 3257
Fax : -
e-mail : [email protected]
Date & Place of Birth: 28th May 1949; Singapore
PROFESSIONAL HISTORY:
2008 :
INTRODUCTION TO PDMS : INSTITUTE of TECHNICAL EDUCATION
2006 : JURONG
SML SHIPYARD
Contracted by JSML to assist in the hull and
steelworks aspect of their new building of Kuwait Oil Tanker Company’s 4950DWT
Bunker Tanker.
2000
: CENTRAALSTAAL SINGAPORE
Contracted
by Centraalstaal Singapore to developed all drawings for the setting up of
their Knock-Down Shipbuilding Plant in Jurong.
1998
: SNR STRUCT/FAB ENGR : SEMBAWANG
ENGINEERING & CONSTRUCTION
Overall in-charge for
checking and approving of shops drawings for fabrication and erection of all
structural steel works for Propane Propylene Purification ( Splitters Unit) and
Syngas Plant on Pulau Sakra.
Achievements: Structural steel works on these two plants were successfully erected on site without a single force fitting or the elongation of boltholes and ahead of schedule.
BIRD-EYE VIEW of PPU & SYNGAS PLANTS on PULAU SAKRA
ERECTION of PREFABRICATED STEELWORKS
1997 : EMPLACEMENT MANAGER : MARITIME VENTURES
Recruitment of tertiary
qualified Engineers and draughtsman internationally for emplacement contracts.
1997 : PIPING DESIGNER : KEPPEL SHIPYARD
Preparation of piping
design and drawings for their project DS PEREGRINE IV, the World’s ninth
dynamically positioned Drillship belonging to Falcon Drilling Inc.
1997
: STRUCTURAL DESIGNER :
INTER-ROLLER ENGINEERING
Preparation and
modification of drawing for fabrication on their cement plant for Kobe Steel.
1996 : STRUCTURAL ENGINEER : SEMBAWANG ENGINEERING & CONSTRUCTION
Design and checking of all
structural steel shops drawing for SEA-VAM Plant Project in Pulau Sakra,
Singapore.
1996 : SENIOR DESIGNER : APT-TECH CONSULTANTS
Redesign and preparation of
foundation drawings for Air Liquid Plants in Pulau Sakra, Singapore and Penang.
1996 : PROJECT ENGINEER : SML SHIPYARD LIMITED
Assigned to trouble-shoot
the upgrading project of Peregrine I Drillship belonging to Falcon Drilling
Inc. Investigation and report on misconstruction, steel weights take-off,
supervise on the rectification, installation and alignment work for six sets of
Risers Racks.
1996 : STRUCTURAL DETAILER
: PAN PACIFIC ENGINEERING
Structural Steel detailing
using StruCAD software for their condominium project, S V Garden in Bangkok.
1995 : STRUCAD
TRAINING : CAD-IT CONSULTANTS
1995 : FREE-LANCE
ENGINEERING AND DESIGN SERVICES
:
SEMBAWANG WORLEY, S’PORE TECHNOLOGIES, JAYA OFFSHORES, ERA REALTY
NETWORKS
1994 : DESIGN ENGINEER : HONG YAP ENGINEERING
Seconded to M/S Elf Atochem SEA Pte Ltd. Design and preparation of all drawings required for the repairs and fabrications of all structural and mechanical parts for their production plant in their Maintenance Department. AutoCAD Release 12 Software is being used here.
1993 : MECHANICAL DESIGNER
: MAI ENGINEERING SERVICES
Seconded to M/S Portek
Systems & Equipment Pte Ltd. The preparation of conceptual General
Arrangements and construction drawings for Gantry Cranes, Trench Openers and
Cable Guides.
1992 : MECH. & PIPING
DSNR : FONGTECH SERVICES
Seconded to M/S Sembawang
Shipyard Pte Ltd. The preparation of As Built Pump Room drawing on MV Bongkot
FSO.
1992 : MECH. & PIPING
DSNR : MAI ENGINEERING SERVICES
Seconded to M/S O G I Pte
Ltd. Design and preparation of pipeline Bundle Installation Proposal drawings
for Malaysian Theylene / Polyethylene Project.
1992 : AutoCAD Release 12 : INFORMATICS COMPUTER SCHOOL
Full time instructions
received in Module 1 only.
1992 : MECH. & PIPING
DSNR : MAI ENGINEERING SERVICES
Seconded to M/S O G I Pte
Ltd. Design and preparation of various jetties and piping drawings for Esso’s
and Caltex’s projects.
1992 : CONTR STRUCT DSNR :
KIM SENG HENG ENGINEERING
Undertake the design and
preparation of structural steel shops drawings for the fabrication on a
Polystyrene Plant in Tuas, Jurong for Ms Elf Atochem.
1992 : DSNR/CO-ORDINATOR :
MAI ENGINEERING SERVICES
Seconded to Edeleanu (Asia)
on the Atochem Polystyrene Plant. To co-ordinate on all civil works,
compilation of vendors’ drawings.
1991 : STRUCT MARINE DSINR
: MAI ENGINEERING SERVICES
Seconded to Bouygues
Offshore on the design and preparation of all cranes movement's drawings on
various loadouts, barge movements and anchoring sequence drawings for offshore
pipe laying, on their Kutubu project.
02/91 to 08/91 : GEN
ADMINISTRATOR : PATRA DRILLING CONTRACTOR
Design to Classification
and preparation of drawings, material takeoff, estimate and costing, site
coordination and conducting of fire system test to SGS safety standard on the
conversion of M.V.Tokai V to Rig Baruna III - Accom / Offshore Support Barge.
1986 - 1981 : FREE-LANCE
ENGINEERING AND DESIGN SERVICES
1984 - 1986 : SNR DSNR
/PROJ SUPERVISOR : SKILLTEK SERVICES
Seconded to M/S Wallace
Brightside Engineering on the Marina Square Project. Design and preparation of
Mechanical and Plumbing drawings for installation. I was later transferred on
site, responsible for all markings for pipe penetrations, supervision on the
installation of all sump pits, ejector and diverter systems and all underground
pumping systems within Marina Square.
1983 : OPERATION MANAGER : BRIGHTLY BAYSIDE ENGINEERING
General responsibility for
the day to day operation of the company.
1983 : SNR STRUCTURAL DSNR
: TEKNISKIL SERVICES
Seconded to Hitachi Zosen
Engineering in Jurong. Design and preparation of shops drawings for construction.
1982: SNR STRUCTURAL DSNR :
IPCOMARINE
Conceptual design and
preparation of all General Arrangements, structural steel detailing for
construction and fabrication of Pipe Loading Wharf facilities at Pasir Gudang,
Elevated Water Tank at Kuala Beliat for Brunei Shell and other marine related
projects.
Achievements: Introduced and implemented a construction methods and procedures which saves the company hundreds of man-hours.
PIPE LOADING WHARF at PASIR GUDANG
1981 : CONTRACT DESIGNER :
MARATHON LETOURNEAU
Preparation of piping
drawings from engineering flow sheets and the preparation of other detailed
drawings.
1980 : CONTRACT DESIGNER :
JARDINE OFFSHORE
The re-designing of all
piping systems for their Barge "GIANT MARINER" which caught fire on
board.
1979 : SNR DSNR / PROJ
SUPERVISOR : GULF AND SINGAPORE
Design and preparation of drawings for con for one unit 72-man Accommodation Barge to ABS classification. Barge was designed with full automation. Duties also includes in the liaison with owner, classification society as well as suppliers. Supervision during the construction of the barge, its utilities, electrical and all piping sanitary systems and all tests; Inclining experiments, electrical load test and others.
ACCOMMODATION BARGE
TRIDAYA XVII
1978
: HEAD OF ENGINEERING : MEDEVAC INTERNATIONAL
Overall responsibility for
their engineering department with nine draughtsmen and women.
1976 : CONTRACT DESIGNER :
SIDO ENGINEERING
Design and preparation of
constructional and detailed drawings for one set Skidding Beams for use on
Total’s Multi-Well Drilling Platform for Forex Neptune, Paris.
SKIDDING BEAM for BEKAPI MULTI-WELL DRILLING PLATFORM
SKIDDING UNDER CONSTRUCTION on DECK of a BARGE
1976 : CONTRACT DESIGNER :
H & H BALIKPAPAN / TOTAL INDONESIE
Design and preparation of
additional piping drawings for existing Multi-Well Drilling Platform Also, the
preparation of detailed drawings for Oil Storage Tanks for other local
companies in Balikpapan.
1975 : CONTRACT DESIGNER :
BROWN &ROOT, Middle East (BAHRAIN)
Design and preparation of
drawings for the fabrication of a 60" Pipe Laying Sled. Also, involve in
the material handling and take-off for a module drilling Rig.
DEEP SEA PIPE LAYING SLED
MAIN BODY of SLED
PRESSURE AIR JET NOZZLES ASSEMBLY HIGH
1975 : SHIP DESIGNER :
SINGAPORE SLIPWAY
Re-design and preparation
of constructional detailed drawings to class for the construction of a 2500 DWT
General Dry Cargo / Mini Bulk Carrier.
Achievements: Developed an approved constructional methods in a booklet form applicable for fabrication and Construction of any kind of ships and boats.
GENERAL DRY CARGO MINI BULK CARRIER
ASEAN PIONEER PREPARING for LAUNCHING
1975 :
CONTRACT SHIP DESIGNER : ELIAS & ASSOCIATES
Design and preparation of
Hull, Mechanical, Piping, Outfitting and other drawings for a 879 H.P. Single
Screw Steel TugBoat.
1974 : SHIP DESIGNER : SEA TRANSPORT DESIGN
Mainly involved in the
design of piping systems for Ocean-Going vessels to various Classification
Societies.
1972 : CONTRACT DTMN/DSNR :
VOSPER THORNYCROFT UNITEERS
Preparation of Hull,
Mechanical and Piping system drawings for fabrication and construction of 7
units, 78’- 6" Fast Patrol Crafts for the Hongkong Marine Police.
HONGKONG POLICE PATROL CRAFT
ONE of the SEVEN FAST PATROL CRAFT UNDER
CONSTRUCTION
1970 : CONTRACT DTMN/DSNR :
FAR EAST OXYGEN & ACETYLENE
Preparation of layouts and
installation drawings for new Plants; Oxygen and Acetylene Plants in Jalan
Buroh and At Boon Keng Industrial Estate. Drawings prepared includes various
installation drawings for machinery, evaporators, tank-trailers, etc. Various
mechanical and piping drawings completed for Celbuilding, Hargill Engineering
and shipyards.
1969 : HULL DRAUGHTSMAN :
VOSPER THORNYCROFT UNITEERS
Preparation of detailed
drawings for new constructions.
1966 to 1969 : DTMN MECH GENERAL : FAR EAST LAND FORCES,
MOD SINGAPORE
Preparation of all
engineering and detailed drawings for fabrications and repairs.
1965 to 1966 : APPRENTICE TRAINING : FAR EAST LAND FORCES, MOD SINGAPORE
Trained in Drawing Office
Practices.
1964 to 1965 : APPRENTICE
TRAINING : FAR EAST LAND FORCES, MOD SINGAPORE
Trained in various metal
and allied trades.
EDUCATION AND
CERTIFICATIONS
P&P of Real Estate
Examination equivalent to 3 GCE "O" Levels in 1995
AutoCAD Release 12
Computer Aided Draughting Course in 1992
Pre-Contract Examination
equivalent to 3 GCE "O" Levels in 1987.
Qualifying Test in
Insurance Salesmanship equivalent to 3 GCE "O" Levels in 1992.
SEMINAR
Safety Management System
(SMS) by Spot Management Services in November 1998
