Through the door with the existing door harness
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Home | ||||||||||||||||
| DIY: Passenger Door Lock Switch part 2 | ||||||||||||||||
|
||||||||||||||||
| Next I attached a harness to the plug | ||||||||||||||||
| From there it's just a matter of running the wires to the driver's side by the foot rest where the wires come out from the driver's door. | ||||||||||||||||
|
||||||||||||||||
Through the door with the existing door harness |
||||||||||||||||
|
||||||||||||||||
| Behind the glove box attached to existing wiring | ||||||||||||||||
|
||||||||||||||||
| Under the steering column | ||||||||||||||||
| Check the color of the wires coming off of the driver's side switch and attach where they come into the footwell area.(mine were white/green, white/blue, and black) | ||||||||||||||||
| The End | ||||||||||||||||
|
|
||||||||||||||||