# XF86Config for IBM XGA-2 and EIZO F35 # Peter H. Wendt / peterwendt@aol.com # Version 990719 # Last revised 990720 Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" EndSection Section "ServerFlags" EndSection Section "Keyboard" Protocol "Standard" AutoRepeat 500 5 # REM the next line or use appropriate value XkbKeymap "xfree86(de)" EndSection Section "Pointer" Protocol "PS/2" Device "/dev/mouse" Emulate3Buttons EndSection Section "Monitor" Identifier "F35" VendorName "Eizo" HorizSync 25-70.0 VertRefresh 50-120.0 # 640 x 480 @ 107.1 Hz Vertical, 56.3 kHz Horizontal # Modeline "640x480" 45.00 640 664 776 800 480 486 489 525 -HSync -VSync # 640 x 480 @ 95.3 Hz Vertical, 50.0 kHz Horizontal Modeline "640x480" 40.00 640 664 776 800 480 486 489 525 -HSync -VSync # 800 x 600 @ 99.7 Hz Vertical, 63.4 kHz Horizontal ModeLine "800x600" 70.00 800 836 970 1110 600 609 613 636 # 1024 x 768 @ 75.2 Hz Vertical, 61.3 kHz Horizontal ModeLine "1024x768" 75.00 1024 1100 1180 1230 768 785 795 815 EndSection # # Description of the XGA-2 graphics board captures with xgapos # Section "Device" Identifier "XGA-2" VendorName "IBM" BoardName "Unknown" Chipset "XGA-2" # value given Ramdac "XGA" # value givem Videoram 1024 # XGA2 always has 1MB VRAM DACspeed 90 # XGA2 has a 90MHz RAMDAC Instance 6 # xgapos IObase 0x2160 # xgapos COPBase 0xC1f00 # xgapos MEMbase 0xfd800000 # xgapos BIOSbase 0xC0000 # xgapos VGAbase 0xA0000 # value given - standard POSbase 0 # means: no testing / given EndSection # the last "display"-section is the one which becomes default ... Section "Screen" Driver "Accel" Device "XGA-2" Monitor "F35" Subsection "Display" Depth 8 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection