THE MANUALS


DISACLAIMER: I can not be held liable for any damages, loss of monies or any other problems resulting from advice given. The links listed below are their own entity I am not affiliated with them in any way nor am I responsible for the content or advice given from them. The information given here is to help us all get pointed in the right direction.

Notice: This manual was scanned June of 1998 and will not reflect changes Kyosho makes to the manual after that date. This manual was downloaded off another website. It was downloaded to provide you with more information without having to search all over for it. The more information a beginner is provided the better. Thanks to Eric Jaakkola at http://www.net-express.com/nexus/ for scanning it in.


Os Carb-1 OS 20C carborator instruction sheet.  
Os Carb-2 Page 2. Details the fine tuning of the needle valves for the 32sx-h.
Os Carb-3 Page 3.

Parts Lst Page 1 of the parts list sheet with photos.
Parts Lst Page 2 of the parts list sheet with photos.
Parts Lst Page 3 of the parts list sheet with photos.
Parts Lst Page 4 of the parts list sheet with photos.

Supplementary Instruction Sheet Last minut changes to the manual.

The text from the Suplimental manual after I OCR'ed it into a .html file.
Suplimental Manual Spar Parts Spare Parts List.

Page 1 Cover page
Page 2 Required for operation
Page 3 Required for operation and Radio operation
Page 4 Before you begin
Page 5 Before you begin and About the "Personal frequency monitor"
Page 6 Step 1: Clutch | Step 2: Tail drive gear
Page 7 Step 3: Frame | Step 4: Mast | Step 5: Main Gear
Page 8 Step 6: Mast | Step 7: Control Lever | Step 8: Frame
Page 9 Step 9: Frame | Step 10: Engine
Page 10 Step 11: Engine | Step 12: Main Gear | Step 13: Fuel Tank
Page 11 Step 14: Fuel Tank | Step 15: Muffler | Step 16: Control Lever
Page 12 Step 17: Frame | Step 18: Rotor Head | Step 19: Rotor Head
Page 13 Step 20: Rotor Head | Step 21: Rotor Head
Page 14 Step 22: Rotor Head | Step 23: Tail Boom | Step 24: Tail Gearbox
Page 15 Step 25: Tail Rotor | Step 26: Tail Rotor | Step 27: Control Lever
Page 16 Step 28: Tail Unit | Step 29: Skid | Step 30: Rotor Head
Page 17 Step 31: Rotor Head | Step 32: Radio
Page 18 Step 33: Radio | Step 34: Elevator Linkage
Page 19 Step 35: Pitch Linkage | Step 36: Rudder Linkage
Page 20 Step 37: Aileron Linkage | Step 38: Throttle LInkage
Page 21 Step 39: Tail Boom | Step 40: Tail Boom | Step 41 Body Mount
Page 22 Step 42: Body | Step 43: Canopy | Step 44: Decal
Page 23 Step 45: Body | Step 46: Main Rotor | Step 47: Main Rotor
Page 24 Step 48: Main Rotor | Step 49: Final Check

--  Flight tips removed to save space --

Page 32 Maintenance: Wearing parts, Overhaul, Crashes
Page 33 Parts Replacement: Engine, Clutch Bell, Tail Drive Coupling, Mast
Page 34 Parts Replacement: Main Gear Backlash, Tailboom, Mast Stopper, Control Rods
Page 36 Parts List
Page 37 Exploded View 1: Rotor Head
Page 38 Exploded View 2: Frame / Mast
Page 39 Exploded View 3: Start Shaft / Engine / Muffler / Fuel Tank
Page 40 Exploded View 4: Canopy / Servo Tray / Landing Gear
Page 41 Exploded View 5: Tail Rotor / Boom
Page 42 Spare Parts List
Page 43 Optional Parts List
Page 44 Screws and Nuts Parts List
Hosted by www.Geocities.ws


Intel Link 300x1 Spacer GIF GeoCities
Hosted by www.Geocities.ws

1