DOCUMENTATION AND OTHER VENDOR REQUIREMENTS FOR PLUGPACK POWER SUPPLY

OTHER MANDATORY REQUIREMENTS:

PLUGPACK
If a device is supplied with a separate power supply or charger, all compliance documentation relevant to that is also required:

SAFETY REPORT to a currently accepted version of EITHER:
AS/NZS 60065
OR
AS/NZS 60950.1
OR
AS/NZS 61558 in conjunction with AS/NZS 61558.2.6:2009

EMC REPORT (IF ADAPTOR NOT INCLUDED IN MAIN APPLIANCE EMC REPORT) to a currently accepted version of EITHER:
AS/NZS CISPR 13 OR
AS/NZS CISPR 22  OR
AS/NZS CISPR 32


ENERGY EFFICIENCY (MEPS/GEMS) REPORT TO
AS/NZS 4665.1:2005+A1
 Performance of external power supplies - Test method and energy performance mark, AND:
AS/NZS 4665.2:2005
Performance of external power supplies - Minimum energy performance standard (MEPS) requirements
The adaptor must also be registered on the www.energyrating.gov datatbase, and carry the appropriate efficiency rating marking.

DECLARED ARTICLE 
An AC Adaptor is a declared (AKA Proclaimed or  Prescribed) article. It consequently requires a current Australian Approval certificate. 
In Australia it must also be registered by the importer on the ERAC Database.
In New Zealand the retailer must sign and keep an on hand an SDoc (Statutory Declaration of Compliance) as well as copies of all relevant Approval documentation.
Its rating label must also carry the mandatory text described on its approval certificate.

POWER CORD
If the adaptor uses a separate power lead, we require current Australian Approvals Certificates for: 
• The mains cord
• The mains plug 
• The appliance connector (if a detachable cord is used). 
This is IN ADDITION  to the Approval Certificate for the plugpack itself, if applicable.