DOCUMENTATION AND OTHER VENDOR REQUIREMENTS FOR LITHIUM BATTERY

ELECTRICAL SAFETY REPORT COVERING:

IEC 62133:2017
Secondary cells and batteries containing alkaline or other non-acid electrolytes –
Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

OTHER MANDATORY REQUIREMENTS:

DOC-QUAL
QUALITY OF COMPLIANCE DOCUMENTATION
For most electrical appliances, ideally there should be no more than about 7 documents, including approval certificates.  It is expected that suppliers will have all these documents in place prior to the tendering process. 

1.NO EVALUATION CAN COMMENCE AND NO ORDERS CAN BE PLACED UNTIL SUITABLE QUALITY DOCUMENTATION  HAS BEEN SIGHTED BY QA.
2. THE FACT THAT DOCUMENTATION MEETS OUR DOCUMENT QUALITY STANDARDS DOES NOT NECESSARILY MEAN THE DOCUMENTS ARE ACCEPTABLE. THE PRODUCT STILL MUST BE SHOWN TO MATCH THE REPORTS.

Documents may be rejected for any of the following reasons:

• Test reports that are more than 3 years old
• Test reports from labs with insufficient accreditation
• Test reports that cover an unreasonable range of models, or completely unrelated models
• Illegible Documents that are not original PDFs from lab or certifying body (Scans of paper documents are NOT acceptable)
• Test reports that do not include clear identifying photos
• Test reports that mention Photo annexes which are not supplied 
• Electrical safety reports with a later date than the Approval certificate
• Electrical Safety reports that do not address Australian Regional Differences.
• Documents with unexplained discrepancies between PDF date and issue date
• Documents that are only Drafts, and/or unsigned and/or undated 
• Documents that are made up of more than 4 PDF sections (including Photo Annexe)
• Documents that are missing pages
•  Mixtures of model-specific and irrelevant documents (so-called "shovelware"). That is, supplying a large stack of unsorted files and expecting  QA  to find for the relevant ones.