- How to Mod. MSI K7T to Set Vcore More Than 1.85 (1.89)
- Theory
- K7T pro use SEMTECH SC1155 Voltage Regulator that have
Vsense pin (Feedback control pin)
- If we reduce Voltage at Vsense
pin it will made Vcore go higher.
- How
- 1. Connect Resistor 5KOhm to pin 6 of SC1155 and another side to GND.
( somewhere like PS/2 port shield)
- It will make Vcore goto ~ 2.00V When you set to 1.85V in BIOS ( you need to connect all L7 on CPU Chip)
- If you need go higher Reduce Resistor value. ( Like 3KOhm or 4 KOhm)
- 2. Relax with 2 cans of sub
Zero cool Bier. : )~
- Remark : If your HeatSink Not so good , Don't do it. Your CPU will BURN....
- Information Resource
- http://pc-nrj.hypermart.net/asus_a7v/
- http://www.vr-zone.com/home.shtml#904
- http://www.semtech.com/pdf/ic/sc1155.pdf