Please Ensure You Turn Off All Other Programs That Are Running And Have Your 'Auto insert notifaication' Switched Off (Un-Checked) In Your Burner's Settings. To Do This Go To 'Settings', Then 'Control Panel', Then 'System', And Then The 'Device Manager' Tab, Then Choose 'CD ROM', Then Your Burner, Then 'Settings' And Now Un-Check The 'Auto insert notification', Job Done!
Also Make Sure Discjuggler Is Set To Take 80 Mins CD's!
If You Got A Unpack.EXE And Inject.EXE With The .CDI You Need To First Run The Unpack.EXE And Then The Inject.EXE
Now Time To Burn....
1. Open Discjuggler
2. Go To 'File' And Then 'New'
3. Now Choose 'CD Image To CD Recorder'
4. In The 'Action Box' Choose 'Write'
5. Now Select The 'Source' Button And Locate The .CDI File And Press 'OK'
6. Ensure The Writing Speed Is Set At x4 Or Below
7. Now In The 'Advanced' Tab Select The Following Settings, 'Mode 1', '2368' Or '2332' (Depends On
Burner), Offset As '0',
TOC As 'CD-ROM', Make Sure Al Others Are Not Selected
8. Now Hit 'Start'
Now It Will probably Pause At 3%, Just Leave It, And Try In Your DC When It's Finnished
If You Get A Buffer Under-Run Message And Have Followed My Instructions, This Meens Your Burner Doesn't Have A large Enough Buffer Cache Or Something....
I Had This Problem With Silent Scope But Found A Solution That Worked....
This Might Work For You So Go To My Buffer Under-Run Sollution Page