Pandora's Battery + Magic Memory Card

Simple step by step instructions, easy as:

1. Turn off the PSP completly

2. Put in the Magic Memory Card then insert the pandora battery.

3. Wait for the screen come on, and Press "X" to install Custom Firmware 3.80 M33.

4. Wait a few moments..and...you now have CFW 3.80 m33-5 on your psp, hit "x" to turn off the psp.

5. Turn on psp either with a normal psp battery or with the AC adapter.


How to charge your pandora battery:

Power the PSP with AC charger, then put the pandora battery in.
OR
Put the pandora battery without the magic memory card then plug the AC charger.
(Charge about 1-2 hours, don't over charge, it may damage the battery, since the battery are pandorized, there no eeprom.bin to keep track how many percent are charged.)


How to make magic memory card into a normal one:

Format it and use it without the pandora battery (use a normal one).

How to make a pandora battery into a normal one :

1. Put in the magic memorystick and Take out normal battery.

2. Power the PSP with the AC charger only .

3.Turn it on , after its on insert the pandora battery .

4. Go to Pandora Battery Maker ... Press L+R to restore you pandora battery into a normal one from the eeprom.bin (that is if you backed it up ) , If you did not back it up and yet want it to become a normal one press square , it will turn into a normal battery ,but you will face problems (like take's too much time to charge and stuff) just don't blame for it , like i said i don't recommend turning a pandora battery back a normal one (whats the use of making it in the first place ???) .

5. NOTE : Don't keep turning you battery into pandora and normal, this will only spoil the battery .


http://www.geocities.com/pandorammc