 |
| Front rotor and hub on a Dodge Ram HD 4x4 |
 |
| When I first pulled my rotors off my truck I used a pulley to fast and pulled the front bearings from the houseing. I was able to clean the bearings and repack the grease and press them back in the hub without having to buy a new hub. A new hub from Freedom Dodge in Lexington was $430.00 with a week lead time. This is not recommeded by me or Dodge, but I did it on my truck. |
 |
 |
 |
 |
| front bearings and the front of the bearing houseing still on hub |
| Back side of the bearing houseing still on knunkle. I had to pull if off and press the two pcs of the bearing houseing back together. |
| This is what the knunkle should look like after you pull the rotor/hub off |
| The hub and rotor |
 |
| This is the front hub |
| Pic by Dodge-diesel.org user "Rammin On" |
| This is my hub after I pressed the 2 pcs back together |
 |