Readme: 

First go to control panel and Change User Accounts and Family Safety Control Setting to 'NEVER NOTIFY' and give OK, Re-Start the system.
 
Check OS Version and do the following.

Win98: Run RunSetup98
For WinXP/WIN7/WIN8/WIN10 32bit: Run RunSetupxp
For WIN7/WIN8/WIN10 64 bit: Run RunSetup64


Run OptoniqAXIA and install in a new folder in D Drive.

Run DhtmalED

*********************************************
*For some cases* you may have to install setup the VsFlex.
*********************************************

Run Optoniq Setup_for_WIN_8_64_Bit or 
Optoniq Ultrasound Driver_Windows or 
CP210x_VCP_Win_XP_S2K3_Vista_7 as per your OS

Copy all files of Patch folder the folder, newly created OptoniqAXIA folder and replace the files.

Create a shortcut on Desktop.

*********************************************
*For some cases*
AddiPress start and type run in search bar.
On run, type regsvr32 vsflex7l.ocx and enter
*********************************************
Connect the USB and see the USb Light Glow.

Go to Computer Devices and check com port and see which number is the Optoniq Ultrasound Device is assigned to
  
Run the software from desktop shortcut.

For the first time, go to settings and Change the post number to appropriate number.

Change the Baud Rate to 57600

Enter Hospital Name, Address, Dooctor name.

Do not change calibration factor, It must be set by engineer's advice.

Now the desktop software is ready to run.

For any question please contact Optoniq Technologies Trchnical Service Team

Tel: +1-323-375-2616  
E-Mail: Support@optoniq.com
www.optoniq.com