| Supermaxx 1500 mod |
| Well is everyone seated......yes. Ok this is wat you do to your gun. Take a small screwdriver (Smallest cha got), and take out all of the screws. If this is your first time opening this gun I would use pliers to turn the screws because they are in there tight and you can gust ignore the tank! After you do that, look toward the barrels. Take out the whole barrel part (It should be easy). There are two screws at the back of the barrels, take them out and then you can slide the black barrel straitener off and remove most of the barrels. After that you hack saw what is left there of the barrels. Make sure that the cut barrels are clean and smooth. Apply 1/2 in. diameter PVC pipe cut into a 6 in. long peice, then hot glue the bottoms of the PVC slices and replace the barrels with them. Now slide the black barrel straitener back on. Put all of the screws back where they belong and now here are the modded specs for the PVC sm 1500 range: 10 Accuracy:10 size: 10 reliability: 10 Very cool gun. |
 |
| Go back home |