shannon more

Base Model: Thin
Skin color: 3, C(-89,5)

Base edit

1.)Skin :1
2.)Cheeks/ Face edit: 9, Face model: 23
eyebrow(0,25)
eyes(-1,1),(59,28)
Nose(-4,5),(-32,0)
Cheeks (17)
Mouth(-8,31)
Jaw(-18,15)

3.)eyes: 10, C(-5,-3)
4.)eyebrows: 32, C ( -95,-3),S (22)
5.)hair: 26, C(-78,100), S(-11)
6.)underwear
7.)Design>Pattern>Face>Simple pattern :156, reduce 3 *, C(-88, 56), S(-18) place just above centre of lips
8.)Face> Moustache: 38, T(-64), C(-96,11),28
9.) Design>Pattern>Face>Simple pattern :166,reduce 3*, T(-75), C(-89,100), S(-4) place just below nose all I am doing is reducing lines above lips
10.)Feet>Shoes>Blank: 13, L(-82), C(100,-100), S(-100)
11.)Legs>Pants> One point: 44, C(-100,62), S(6)

IMPORTANT! PLEASE USE THESE HELP LINKS:

http://www.wrestlinggameszone.com/modules/Symcaws/images/shannonhelp1.jpg
http://www.wrestlinggameszone.com/modules/Symcaws/images/shannonhelp2.jpg
http://www.wrestlinggameszone.com/modules/Symcaws/images/shannonhelp3.jpg

TIME TO USE HELP LINKS AT ALL TIMES FOR THE DESIGN ON HIS PANTS

NOTE 1:THERE ARE ORIGINALLY 4 THICK RED LINES I REFER TO THESE AS STRIPES ON THE PANTS SO I AM COVERING THESE UP WITH PATTERN PEICES IN ORDER TO MAKE A THINNER DIAGONAL LINE OUT OF THEM

NOTE 2: THE STRIPES ON THE PANTS ARE STRAIGHT I AM MAKING THEM MORE DIAGONAL WITH HELP OF PATTERNS PLACEMENT

12.)Design>Pattern>Left Leg>Simple Pattern: 159, reduce 1*, C(-37,45), S(-100) place on left almost high as possible place to cut into second red stripe * SEE HELP LINK

13.) Design>Pattern>Left Leg>Simple Pattern: 159, reduce 1*, C(-37,45), S(-100) place to cut into third stripe. Remember i am carving out a diagonal line

14.) Design>Pattern>Left Leg>Simple Pattern: 158, reduce 1*, rotate 3*, C(100,37), S(-29) place above third stripe a little and then place a shown I am trying to make the stripe go diagonal and cover up parts not needed later

15.) Design>Pattern>Left Leg>Simple Pattern: 158, reduce 1*, rotate 3*, C(74, 47), S(-100) place make and cover up some red parts to make the stripe look like a thin red diagonal stripe like the one in pic

16.) Design>Pattern>Left Leg>Simple Pattern: 158, reduce 1*, rotate 3*, C(74, 56), S(-100) place so that the 4th stripe is carved into a diagonal line

17.)Design> Letters>Sign, left legs> first page> 4th coloumn last row, rotate 1* , C(100, 32), S(-37) I am creating a stripe of my own here between the blank space on third and fourth stripe already on this leg see help link for clarification of placement

18.) Design> Letters>Sign, left legs> first page> 4th coloumn last row, rotate 3*, C(100, 32), S(-37) place to overlap with previous pattern and extend the stripe over a bit see pic

NOW FOR RIGHT LEG almost repeating the left leg but with a little variety

**SEE HELP LINK**

19.) Design>Pattern>right Leg>Simple Pattern: 159, reduce 1*, C(-90,43), S(-100) place to reduce thickness of second stripe see help link. This is a a square that will cut into the stripe and help to make this stripe a diagonal peice later when the triangler peice is added

20.) Design>Pattern>right Leg>Simple Pattern: 159, reduce 1*, C(-89,53), S(-100) place to cut into the third stripe see help link

21.) Design>Pattern>right Leg>Simple Pattern: 158, reduce 1*, rotate 3*, C(-30,51), S(-100) place above 4th stripe a little and move so a diagonal line is made

22.) Design>Pattern>right Leg>Simple Pattern: 158, reduce 1*, rotate 3*, C(-90,38) , S(-100) place above 3rd stripe a little and then place a shown, the idea is to cut into the stripe a little I am trying to curve out a diagonal line of sorts

23.) Design>Pattern>right Leg>Simple Pattern: 158, reduce 1*, rotate 3*, C(-89,53), S(-100) place below 3rd stripe a little and then place a shown, the idea is to cut into the stripe a little I am trying to curve out a diagonal line of sorts

24.) Design> Letters>Sign, right leg> first page> 4th column last row, rotate 1* , C(100, 37), S(-32) I am now creating a stripe of my own here between the original third and 4th stripes from the original pants

25.) Design> Letters>Sign, right leg> first page> 4th column last row, rotate 1* , C(100, 37), S(-32) place slightly above and to the right of previous pattern

I will now make a red border around the sides where there are white spaces see pic

26.) Design>Pattern>left leg>Simple pattern :166,reduce 1*,rotate 1*, C(100,100), S(-33) place as seen in pic all I am doing here is giving a border like effect
27.) Design>Pattern>left leg>Simple pattern :166,reduce 1*, rotate 1*,C(100,100), S(-33) place as seen in pic again all I am doing here is giving a border like effect
28.) Design>Pattern>right leg>Simple pattern :166,reduce 1*, rotate 1*,C(100,100), S(-33) place as seen in pic again all I am doing here is giving a border like effect
29.) Design>Pattern>right leg>Simple pattern :166,reduce 1*, rotate 1*,C(100,100), S(-33) place as seen in pic again all I am doing here is giving a border like effect

Now for the top of pants design

30.) Design>Pattern>BODY Leg>Simple Pattern: 158, reduce 1*, rotate 1*, C(-89,69), S(-100) place high on right leg , make it cut into the red stripe without going onto the body
31.) Design>Pattern>BODY Leg>Simple Pattern: 158, reduce 1*, rotate 1*, C(-89,69), S(-100) place high on left leg , make it cut into the red stripe without going onto the body

Now I am making the V on the front of his pants near crotch area
32.)Design>Letters>Body>4th row, 4th column, , C(100,95) place to help make the V, place just off centre to the right from neat the crotch area

33.) Design>Letters>Body>4th row, 4th column, rotate 1*, C(100,95) place to finish V
34.) Design>Letters>Body>4th row, 4th column, , C(100,95), the best explanation for this is simply place as seen in pic

35.)Repeat above but for the other leg see pic for directions but rotate 1*

**Now I am making tattoo here on the caws left wrist
36.) Design >Patterns>Left arm>Tattoos: 28, rotate 2*, reduce 1*,T(-17),C(-100,-3) place above the wrist make sure when the taped gloves and wristbands are put on that half of this can still be seen
37 Design >Patterns>Left arm>Tattoos: 11,reduce 2*, T(-39), C(86,-3) place slight below previous pattern and along side the red rose part of the previous pattern
38.)Hands> Gloves: 25, C(-100,-3)
39.)Arms>Both>Wristband>Blank: 1, L(-67), C(23, 40), S(-100)

Form

Head(-70),39
Neck (-48,-51),15
Chest(-94,-85)
Shoulder(-100,-79),-48
Abdomen (-40,-58) ,14
Arms (-32,7), (-100)
Forearms(-41,-19), -67
Hands (-89,-12), -39
Waist(15,-53)
Thigh(-24,-30), -57
Legs (-25,-42),-13
Ankles (-78,-45)

Height 6�4�

FOR THE V1 SHIRT VARIANT

First of all

DELETE LAYERS 26 to 29 and 30, 33, 36, 37

How add on this

STEPS to create t-shirt

1.)Body> T-shirts> Blank: 8> L(-95), C(33,-37), S(-19)
2.)Design> Letters> Font 2> Body> V place on chest as seen in pic , C(-67,-3)
3.)Design> Body> Simple patterns: 166, reduce 3*, C(21,100), S(-88) place to extend V at top
4.) Design> Body> Simple patterns: 166, reduce 1*, rotate 1*, C(56,87) ,S(16),place besides V
5.)Design> Body>Letters> Numeral , page 1, reduce 1, C(33,100), S(-100)place the first 1 avaialable slighty to the left of step 4 and slight above placement. I am giving this 1 here a purple outline on the sides
6.)Design> Body> Alhabet: I , page 1, reduce 1*, C(-6,100), S(-100) place place to extend 1 a bit so that the white part of this 1 is horizontally level with the V

7.) Design> Body>Letters> Numeral , page 5, second coloumn, 3rd row, reduce 1*, C(-13,82), S(-100) place on top pf previous piece
8.)WWE Pattern: 8, rotate 2*, reduce 1*, C( 100, -3), S(-100) place on back of shirt in the middle