Appointments as a Consultant :
As a member of Consultancy, Research and Testing Service (CRTS) committee of Electrical & Electronic Engineering (EEE) Department of Dhaka University of Engineering & Technology (DUET), doing Consultancy and Testing works for a number of clients. See below of my contacts:
July 2004 to August 2006	Client: Role: Scope of Services & Responsibilities:	Bangladesh Bank, Head Office, Dhaka, Bangladesh Consultant Intends to modernize and extend the CCTV system, Fire detection and Security systems in the buildings of Bangladesh Bank’s Head Office, Dhaka, Bangladesh Phase – I : Layout Design, Specification and Estimate. Following consultancy services are included: ·   Completion of layout design of engineering works ·    Preparation of the technical specification of items ·   Preparation of bill of quantity ·   Preparation of estimate of item-wise cost   Phase – II: Tender Evaluation and Top supervision Following consultancy services are included: ·   Evaluation of tenders for the selection of contractor ·   Inspection of materials supplied by the contractor ·   Top supervision of system wiring and Installation works done by the contractor ·   Top supervision of testing and commissioning works
August 2004             February 2006	Client: Role: Scope and services:             Scope and services:	HAQ Engineers, Dhaka, Bangladesh Consultancy and Testing Services Heat Cycle test of H-type connectors (# 1/0 ACSR Run and # 3/0 ACSR Tap) ·    The heat cycle test was conducted for 125 cycles according to Class C of ANSI C119.4 -1976 specifications ·    The loop configuration, test and measurements of temperature and resistance were made as per NEMA standard publications CC 3-1973 and ANSI C119.4 -1976 specifications   Heat Cycle test of Hot Line Clamp connectors (# 4/0 ACSR Run and # 4/0 ACSR Tap) ·    The heat cycle test was conducted for 125 cycles ·    The loop configuration, test and measurements of temperature and resistance were made as per ANSI C119.4-1991 and NEMA CC3-1973 standard
January 2005       August 2005               July 2006	Client: Role: Scope and services:       Scope and services:               Scope and services:	SQ Wire and Cable Co. Ltd., Dhaka, Bangladesh Consultancy and Testing Services ·    Type test of Penguin, DOG, RAVEN, SWALLOW, RABBIT ACSR conductor ·    Type test of Solid Hard Drawn Aluminium conductor ·    Type test of Annealed Aluminium conductor   ·    Type test of D-6 Annealed Copper conductor ·    Type test of D-7, D-8 Standard Hard Drawn Copper conductor ·    Type test of Solid Hard Drawn Aluminium conductor ·    Type test of D-29 (AMES), D-30 (AZUSA) all Aluminium Alloy conductor ·    Type test of Rabbit ACSR conductor ·    Type test of GNAT, ANT, WASP PVC Insulated Stranded Aluminium conductor   ·    Type test of 2 ´ 4, 2 ´ 10 RM PVC Insulated Duplex Cable ·    Type test of 3 ´ 10, 3 ´ 25 RM PVC Insulated Quadrulex Cable ·    Type test of 2 ´ 4, 2 ´ 2.5 RM Flexible Cable   As per ASTM, NEMA, IEC, BDS, and BS standard
April 2005             September 2005	Client: Role: Scope and services:             Scope and services:	SBS Cables Ltd., Dhaka, Bangladesh Consultancy and Testing Services ·    Type test of PENGUIN, SWALLOW, HAWK, RAVEN ACSR Conductor. As per ASTM B-232, B-498 standard ·    Type test of WASP, ANT all Aluminium Conductor (Insulated). As per BS-6485, 215-part-1, BDS-1036 standard ·    Type test of DOG, MERLIN, RABBIT ACSR conductor. As per BS-215-part-II, BS-443, BDS-1037 standard   ·    Type test of 1 ´ 50, 1 ´ 70 RM NYY conductor (Insulated). As per BDS-901:85, IEC-60502-1, IEC-228 and VDE-0271/06.97 standard ·    Type test of Guy Wire. As per BS-183 1971, BS-443 1982 standard ·    Type test of D-6 Annealed Copper conductor. As per ASTM B-3, B-8, B-193 standard
August 2005             January 2006	Client: Role: Scope and services:             Scope and services:	Pasha Electro Industries Ltd., Dhaka, Bangladesh Consultancy and Testing Services Heat Cycle test of Aluminium H-type connectors (# 1/0 ACSR Run and # 3/0 ACSR Tap) ·    The heat cycle test was conducted for 125 cycles according to Class C of ANSI C119.4 -1991 specifications ·    The loop configuration, test and measurements of temperature and resistance were made as per ANSI C119.4 -1991 specifications   Heat Cycle test of Aluminium H-type connectors (# 4/0 ACSR Run and # 4/0 ACSR Tap) ·    The heat cycle test was conducted for  125 cycles according to ANSI C119.4 -1991 specifications ·    The loop configuration, test and measurements of temperature and resistance were made as per ANSI C119.4 -1991 specifications
July 2006	Client: Role: Scope and services:	LS VINA Cable, So Dau, Hong Bang District, Haiphong City, Vietnam Consultancy and Testing Services ·    Type test of 4/0 AWG 15 KV Insulated Tree Wire (D-62) ·     The loop configuration, test and measurements of temperature and resistance were made as per ANSI C119.4 -1991 specifications   As per ASTM, NEMA standard.
July 2006	Client:   Role: Scope and services:	DAEWON CABLE CO. LTD., 134-7 Ochu-ri, Godeok-Myeon, Yesan-gun, Chungcheongnam-do, Korea   Consultancy and Testing Services ·    Type test of Duplex Cable (3-AWG, 6-AWG) ·    Type test of Quadruplex Cable (6-AWG) ·    Type test of ACSR HAWK   As per ASTM, NEMA, IECA standard