NIKHIL GUPTA 2508, CEBA Bldg., Mechanical Engg. Dept.Louisiana State University, Baton Rouge, LA 70803 USA Ph: (225) 773 9555 (Res.), (225) 578 5933 (Lab)Email: [email protected] |
Education: |
Ph.D., Mechanical Engineering Louisiana State University, Baton Rouge, LA 70803 USA |
Aug. 2003 |
|
|
M.E., Metallurgical Engineering Indian institute of Science, Bangalore 560 012, India
|
Jan. 1998. |
|
|
B.E., Metallurgical Engineering M. Regional Engg. College, University of Rajasthan, Jaipur 302 004, India
|
Jan. 1996. |
|
Work Experience: |
Research Assistant, Louisiana Composites Laboratory Mechanical Engineering Department, Louisiana State University, Baton Rouge, LA 70803 USA · Fabricate variety of composites using unidirectional carbon fiber prepregs, carbon fabrics and glass fabrics. · Fabricate particulate composites. · Use compression molding, vacuum bagging and hand lay-up for fabrication. · Testing of various types of composites for mechanical and hygrothermal properties. · Finite Element Analysis of laminated composites.
|
Aug. 1999 – Present |
|
|
Instructor, Materials Testing Laboratory Mechanical Engg. Dept., Louisiana State University, Baton Rouge, LA 70803 USA · Testing of metals, polymers, ceramics and composites for hardness, tensile, compression, bending and fatigue properties. · Evaluation of lab reports and grade assignment.
|
Summer 2002 |
|
|
Teaching Assistant, Materials Selection in Mechanical Engineering course Mechanical Engg. Dept., Louisiana State University, Baton Rouge, LA 70803 USA · Assist students in homework problems, which are on variety of engineering materials and their applications. · Evaluation of assignments and projects.
|
Jan. 2002 – May 2002 |
|
|
Teaching Assistant, Materials Testing Laboratory Mechanical Engg. Dept., Louisiana State University, Baton Rouge, LA 70803 USA · Testing of metals, polymers, ceramics and composites for hardness, tensile, compression, bending and fatigue properties. · Evaluation of lab reports and grade assignment.
|
Jan. 2000 – Dec. 2001 |
|
|
Lecturer, Department of Metallurgical Engineering Punjab Engineering College, Chandigarh 160 012 India · Master’s Thesis Guided: Effect of particulate fillers on Mechanical Properties and Performance of Fiber Reinforced PMC’s. · Developed a new Laboratory for composites fabrication. · Taught undergraduate courses on Structural Metallurgy, Mechanical Metallurgy, X-Ray Diffraction. · Taught Graduate Level Course: Introduction to Composites.
|
Jun. 1998 – Jun. 1999 |
|
Intern, Bhilai Steel Plant Steel Authority of India integrated steel plant, Bhilai, MP (India) · Study of production process for iron and steel. · Study of casting, continuous casting, rolling mill and other units.
|
May 1994 –Jun. 1994 | ||
Research Projects: |
· Analysis of Particulate composites core sandwich structures. · FEM analysis of particulate composites using ANSYS. · Modeling of laminates, particulate composites and sandwich structures. · Experimental studies on flyash filled polymeric composites with and without fibers. · Detection of low energy impact damage in carbon fabric laminates by Ultrasonic Imaging. · Short-term hygrothermal studies of Syntactic Foams. · Short term hygrothermal studies of Glass fabric Laminates. · Characterization of Laminated Laminates. · Scanning electron microscopic studies of fracture features of particulate composites. |
||
Technical Skills: |
· Fabrication Techniques: Laminate and sandwich composite by Hand Lay-up, Vacuum Bagging and compression molding, particulate composites by casting techniques. Used variety of furnace and ovens. · Characterization: Instron and MTS servo-hydraulic systems, Hardness Testers, Impact Testing machines, Scanning Electron Microscopy, EDS, WDS, X-Ray Diffraction Techniques, Ultrasonic Imaging. · Software Packages: ANSYS, AutoCAD, Matlab.
|
||
Awards and Honors: |
During PhD · American Society for Composites PhD Research Scholarship Award, 2002-2003. To be received at 17th ASC Technical Conference banquet at Purdue University, IN, on Oct 22, 2002. · Chair, “Composite piping Technology” Session, ASME Engineering Technology Conference on Energy-2002, Houston, TX. · Co-chair, 2002 ME Graduate Student Conference organizing committee, Mechanical Engineering Department, Louisiana State University, Baton Rouge, LA 70803. · Chair, “Damage and Rehabilitation of Composites” Session, ASME Engineering Technology Conference on Energy-2001, Houston, TX. · Reviewer, 2001, Composites B: engineering, Elsevier Science. · Vice-President, ASM/TMS Joint student’s chapter, Louisiana State University (1999-Present). · Member ASTM D30- Standards Coordination and Globalization Initiative (SCGI).
Before PhD · BEST PAPER-1998 award from Indian Society of Non-Destructive Testing for research paper published in Journal of Non-Destructive Evaluation. · Received Govt. of India sponsored GATE scholarship from Aug. 1996-Jan. 1998 for M.S. · Secured 4th rank in the Univ. of Rajasthan, India, in B. Eng., First position in final year.
|
||
Publications:
|
Ph.D. Dissertation: Composite Sandwich Structures – Effect of cenospheres in the core materials for structural applications.
M.S. Thesis: Fabrication and Characterisation of Syntactic Foam Core Sandwich Composites.
|
||
|
Refereed Journal Papers 1. Gupta, N., Woldesenbet, E., Kishore and Sankaran, S.; Response of Syntactic Foam Core Sandwich Structured Composites to Three-Point Bending; Journal of Sandwich Structures and Materials, Vol. 4, No. 3, 2002, 249-272. Abstract. 2. Woldesenbet, E., Gupta, N. and Vinson, J. R.; Determination of Moisture Effects on Impact Properties of Composite Materials; Journal of Materials Science, Vol. 37, No. 13, 2002, 2693-2698. Abstract. 3. Gupta, N., Woldesenbet, E. and Kishore; Compressive fracture features of syntactic foams – microscopic examination; Journal of Materials Science, Vol. 37, No. 15, 2002, 3199-3209. Abstract. 4. Gupta, N., Kishore, Woldesenbet, E. and Sankaran, S.; Studies on compressive failure features in syntactic foam material; Journal of Materials Science., Vol. 36, No. 18, 2001, 4485-4491. Abstract. 5. Gupta, N., Brar, B. S. and Woldesenbet, E.; Effect of filler addition on the compressive and impact properties of glass fiber reinforced epoxies; Bulletin of Materials Science, Vol. 24, No. 2, Apr. 2001, 219-223. Download. 6. Gupta, N., Kishore and Sankaran, S.; On the Characterization of Syntactic Foam Core Sandwich Composites for Compressive Properties; Journal of Reinforced Plastics and Composites, Vol. 18, No. 14, 1999, 1347-1357. Abstract. 7. Gupta, N., Karthikeyan, C. S., Sankaran, S. and Kishore; Correlation and Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams with and without Fibers; Materials Characterisation, Vol. 43, No. 4, 1999, 271-277. TOC. Abstract. 8. Gupta, N., Kishore, Murthy, C. R. L., Dwarkanath, A. and Sankaran, S., On the Associated Problems of using Ultrasonic Imaging in Characterizing Closed Cell Rigid Foam and their Sandwich Configurations; Journal of Non-Destructive Evaluation, Vol. 18, No. 3-4, 1998, 27-31. Abstract. 9. Gupta, N. and Woldesenbet, E.; Effect of wall thickness of cenospheres on the compressive properties of syntactic foams; submitted to Composite Science and Technology. 10. Gupta, N. and Woldesenbet, E.; Hygrothermal studies on syntactic foams and compressive strength determination; submitted to Composite Structures. 11. Gupta, N. and Woldesenbet, E.; Experimental Investigation on the Effect of cenosphere Radius Ratio on the Flatwise compressive properties of Syntactic Foams; to be submitted to the Journal of Materials Science. 12. Gupta, N. and Woldesenbet, E.; Characterization of Compressive Properties of Syntactic Foam Core Sandwich Composites for Change in Cenosphere Radius Ratio; to be submitted to Composite Science and Technology. 13. Gupta, N. and Woldesenbet, E.; Characterization of bending properties of syntactic foam core sandwich composites for change in cenosphere radius ratio; to be submitted to Journal of Sandwich Structures and Materials.. 14. Jadhav, A., Gupta, N. and Woldesenbet, E.; High strain rate properties of syntactic foams and effect of radius ratio parameter; to be submitted to Composites B: engineering.
|
||
|
Conference Papers and Presentations1. Gupta, N. and Woldesenbet, E.; Effect of Radius Ratio Parameter of Cenospheres on the Compressive Properties of Syntactic Foams; (accepted) in proceedings of ASC 17th Annual Conference, October 21-23, 2002 Purdue University, West Lafayette, IN. Abstract. 2. Gupta, N. and Woldesenbet, E.; FEM Contact Analysis and Experimental Investigation of the Effect of Radius Ratio of Cenospheres on Syntactic Foams; (accepted) in proceedings of 10th US-Japan Conference on Composite Materials, September 16-18, 2002, Stanford University, CA. Abstract. 3. Gupta, N. and Woldesenbet; Effect of wall thickness of cenospheres on shear properties of syntactic foam core sandwich composites; (accepted) in proceedings of 34th International SAMPE Technical Conference, November 4-7, 2002, Baltimore, Maryland. Abstract. 4. Gupta, N., Woldesenbet, E., Li, G. and Peck J.; High Velocity Impact Response of Syntactic Foam Core Sandwich Composites; in proceedings of Sixth International Conference on Sandwich Structures, Mar 31-Apr 2, 2003, Fort Lauderdale, FL. 5. Gupta, N. and Woldesenbet, E.; Hygrothermal Studies on Syntactic Foams; (accepted) 2002 ASME International Mechanical Engineering Congress & Exposition, Nov 12-22, 2002, New Orleans, LA. Abstract. 6. Gupta, N. and Woldesenbet, E.; Microscopic studies of syntactic foams tested under three-point bending conditions; in proceedings of ETCE-2002, Feb 2002, Houston, TX. Abstract. 7. Gupta, N. and Woldesenbet, E.; Modeling of glass cenosphere filled epoxy composites; TMS Annual Meeting 2002, Feb 2002, Seattle, WA. Abstract. 8. Gupta, N. and Woldesenbet, E.; Stress Concentration Factor approach to analyze the Deformation and Fracture behavior of Particulate Composites; in proceedings of ASC 16th Annual Conference, Blacksburg, VA, Sept. 9-12, 2001. Abstract. 9. Gupta, N. and Woldesenbet, E.; Deformation and Fracture Characteristics of Cenosphere filled Epoxies under Compressive Loading Conditions; in proceedings of ETCE-2001, Feb 2001, Houston, TX. Abstract. 10. Gupta, N. and Woldesenbet, E.; Stress Intensity factor approach for estimation of fracture behavior of cenospheres filled polymers; TMS Annual Meeting 2001, New Orleans, LA. Abstract. 11. Gupta, N. and Woldesenbet, E.; Experimental studies on three point bending of syntactic foam core sandwich structured composites; TMS Fall Meeting 2001, Indianapolis, IN. Abstract. 12. Gupta, N., Brar B. S. and Woldesenbet, E.; Effect of Filler Addition on Mechanical Properties of Glass Fiber Reinforced Epoxies; TMS Fall Meeting-2000, Oct 2000, St. Louis, MO. Abstract.
|
||
|
Student Paper Presentations1. Gupta, N.; Effect of wall thickness of cenospheres on the compressive properties of syntactic foams; 2002 ME Graduate Student Conference, Louisiana State University, Baton Rouge. Abstract. 2. Gupta, N. and Woldesenbet, E.; Effect of Cenospheres Incorporation on Deformation Behavior of Epoxy Composites; DoE EPSCoR LS-LAMP Research Conference, Feb 2001, New Orleans, LA. Abstract. 3. Gupta, N.; Reinforced Syntactic Foam; poster presented at International Metallographic Society Metallography contest at TMS Fall Meeting-2000, Oct 2000, St. Louis, MO. Abstract. 4. Gupta, N.; Modeling of Filler Containing Polymer Matrix Composites; Intellectual Gumbo, 1999, Louisiana State University, Baton Rouge. Abstract. 5. Gupta, N. and Kishore; Optimization of Void Content by the Introduction of Glass Fibers; COMPOSIT-98, Indian Institute of Technology - Kharagpur (India). Abstract.
|
||
Professional Affiliations: |
· American Society for Composites: Student member since 2000. · American Society for Metals: Student Member since 1999. · TMS (The Minerals, Metals and Materials Society): Student Member since 1997. · Indian Institute of Metals: Life Member. |