C3 vs. S3 Dyno Run

Ben and Clark,

The Dyno run below compares the S3 cams to the C3 cams. The car had a CAI, Header, Pulleys and S3 cams on the base run (Naji.003)

The other two runs had the C3 cams and the JWT ECU with the C3 program. The car lost power everywhere from 2K rpm all the way to 6500-6700 rpm. It gained 11 hp after that.

Please advise me on what I need to do to make these cams perform as they did on Rob Cadle's car. He made about 168 hp and 130lbft of torque.

He also did not lose power above 5K with these cams. Please tell me what to do to get power that is similar to Rob's car.

Thanks

Naji