You wouldn't think installing corner lights with be such a pain in the ass. Well these new black housing corner lights didn't want to fit at all. Part of the headlight bracket needs to be cut. I used a soldering iron to melt away the plastic. You could probably use a dremel tool or if you don't mind taking the whole headlight out you can just use a saw. In the pic you can see where it needs to be cut in order for the corner light to fit.

Depending on what bulb you want to keep, the constant or blinking bulb, you will need this extra step. Since I wanted to keep the blinking bulb I had to narrow down one of the little tabs on the bulb holder. I just used my soldering iron and melted off a little of each side to narrow it down.

Now its time to put the corner light in. You just put it in like the original corner light but you have to use a little more force to get it in there. Since the hole in the bracket on the black housing corner didn't line up with the hole in the car I had to drill a new hole so they lined up. After all this modification the corner light still didn't fit how i wanted it, but overall still looks better