Enter statistical data - resistance factor for Mm, Vm, Fm, Vf, P, Table F1, Clause F1.1, 1996 AISI Cold-Formed Specification. Page no V-90.
Select appropriate radio button either for strutural members or for the connections.
Mean value of the professional factor 'P' can be taken as the average of the test results.
If yield strenght and the material thickness of the steel for which the tested sections are formend is larger than the specified value, the test results shall be adjusted down to a specified design values.
Miminum three identical tests shall be prerformed,
Deviation of the individual test result from the average value of the test results shall not exceed + or - 15 percent |
