| LUGGAGE RACK INSTALL |
| 12 mm socket 13 mm socket Socket wrench and extention bar 13 mm open end wrench Drill and Bit |
| 1. Remove the Reflex tail fin (Pictures CFLR01 & 2 ) |
| 12 mm socket 3 Bolts |
| 2. Drill holes into fin ( Pictures CFLR03 & 4 ) |
| Drill in marked area ( recessed area ) |
| 3. Insert bolt, lock washer, and washer from the bottom side of the wing. |
| 7. Attach fin back on Reflex. (CFLR05, 06,07) |
| 5. Loosely attach rack. |
| Price = ( Price in 2003 ) |
 |
| These are the instructions on how to install a Custom Fabrications rear luggage rack. Custom Fabrication 319-277-3750 [email protected] |
| PROBLEM: |
| More storage space needed. |
| SOLUTION: |
| Custom Fabrications Luggage Rack |
| TOOLS / EQUIPMENT NEEDED: |
| DIFFICULTY RATING: |
| EASY |
| INSTRUCTIONS: |
 |
| Picture CFLR01 |
| If you need a larger view of any of the pictures on these pages E-Mail me with the picture number and I will send it to you. |
|
| This rack allows you to carry items or mount a trunk or box to the back of your scooter. |
| 4. On the other side place - plastic washer, then washer, then start treads into bottom of rack. |
| 6. Tighten rack on, go from bolt to bolt while tightening do not tighten them one at a time. |
| 8. You are done. |
 |
 |
| Picture CFLR02 |
 |
| Picture CFLR03 |
 |
| Picture CFLR04 |
 |
| Picture CFLR05 |
 |
| Picture CFLR06 |
 |
| Picture CFLR07 |
 |
| Picture CFLR08 |
 |
| Picture CFLR09 |
 |
| Picture CFLR10 |
| This rack will work with the Givi TB18 passenger backrest also installed. |
| The luggage rack gives you 16 in x 10 in surface area to carry stuff or mount your trunk. |