| ADJUST SEAT |
| PROBLEM: |
| PROCEDURE: |
| The following is an alteration done to one of my Reflexs. This is for informational purposes only. |
| Any modifications are done at your own risk. Check local laws for restrictions on some of these changes. |
| I've gotten several E-mails from people who couldn't adjust their seat back so heres the instructions on how to do it. |
| 3. Remove the screws |
| You have to take them all the way out because the channel is not a actual slot but has many different holes. ( See Picture AS2 ) |
| 5. Hold in place and open seat back up. |
| There are many spots available for adjustment. You can also ride the bike with it removed if you have real long legs. |
| 4. Put the seat to where it is comfortable. |
| 7. Thats it your done. |
 |
|
| If you need a larger view of any of the pictures on these pages E-Mail me with the picture number and I will send it to you. |
 |
 |
| Picture AS1 |
| Picture AS2 |
| 1. Open the seat up. |
| 2. Locate the two hex screws on the bottom (underside) of seat ( Picture AS1 ) |
| 6. Put the screws back in place ( You may have to move it to the closest hole ) |