| CUP / DRINK HOLDER INSTALL |
| Drill and Bit Wrenchs |
| 1. Tape drilling template in place |
| 2. Mark where holes are to be drilled. |
| 3. Double check mounting location ( clear of all other items? ) |
| 7. You are done. |
| 5. Insert bolts into holder run thru holes and attach washers and bolts to the back side. |
| Price = ( Price in 2003 ) |
 |
| These are the instructions on how to install a Custom Fabrications rear luggage rack. Custom Fabrication 319-277-3750 [email protected] |
| PROBLEM: |
| Need a holder for my drink. |
| SOLUTION: |
| Custom Fabrications cup / drink holder |
| TOOLS / EQUIPMENT NEEDED: |
| DIFFICULTY RATING: |
| EASY |
| INSTRUCTIONS: |
 |
| Picture CFCH01 |
| If you need a larger view of any of the pictures on these pages E-Mail me with the picture number and I will send it to you. |
|
| This holder an adjustable drink holder which hold the drink within easy reach of the drivers left hand. |
| 4. Drill holes |
| 6.Tighten bolts |
| Picture CFCH02 |
| Picture CFCH03 |
| There are several mounting options. This is the mount to the glove box lid. Anothers I have seen include removing two screws on left grip and mounting the holder on the handlebars. |
 |
 |
 |
 |
| Picture CFCH04 |
 |
| Picture CFCH05 |
| NOTE: |