 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Republic Custmize Set - continued
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Speaking of Gojulas with the entire set mounted. Here it is. It was pretty simple to attach the CP-01 cannons. I just used a couple of the connectors and put it on the caps in the knee joint. He looks really cool this way, and I promptly put him on my mantle so I can see him every day.
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
While we're on the subject of "unofficial" ways to mount the set, here's a little something I did. It's Mad Thunder with the complete set mounted. It's not an official mounting and it took a little work to figure it out. I've wanted to do this since I first got into Zoids and found a pic on Channel Zi (RIP). There are parts that seem meant to mount to MT, such as the CP-01 cannons on the back. The pegs and holes line up perfectly. And the tail supports and leg boosters fit pretty good too, with the right connectors. The difficult part is getting the CP-10 cannons and thrusters to fit. Basically, if you're looking to do this, you need 2 X8 connectors. Place the X8 connectors on the pegs at the top of MTs tail, then mount the CP-10 supports onto the X8. The connector should fit snugly in the holes in the middle of the CP-10 support. Then just mount the thrusters onto the CP-10 support and adjust as necessary. One other thing. I put the mortar pod on the front ankle because that's the only really good place to put it since it mounts on a cap.
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Here are all of the individual parts trees. There were five total plus a couple sprues of black caps (Gojulas style), two white caps (Blade Liger style), two black rubber hoses, a sheet of stickers and an instruction manual. One thing I noticed right off was the difference in the kits cap size and the cap size on my Gojulas and Ultrasaurus. The kit caps were a little thicker and so the parts that mount on them were loose when mounted on the Gojulas and Ultra caps. So I had to swap them out to mount the parts. Other than that, everything fit nice and snug. Pretty cool!!!
|
|
|
|
|
|
|
|
|
|
|