1972 Dodge Charger
WH23G2A104663
132 YMF
| 30 July 2000 | ||
| - Pulled The Carburetor off for rebuild | ||
| 04 September 2000 | ||
| - Stripped out human compartment | ||
| 09 September 2000 | ||
| - Built frame for seat | ||
| 10 September 2000 | ||
| - Installed Seat | ||
| 16 September 2000 | ||
| - Removed intake for replacement | ||
| - Found new intake wouldn't fit | ||
| 17 September 2000 | ||
| - Found bottom plane of new intake incorrect, and no new intakes around | ||
| 24 September 2000 | ||
| - Tried replacing the intake and found the right one on the third try | ||
| - Created a gasket with cocking gun style gasket creator goo | ||
| 01 October 2000 | ||
| - Installed carburetor and then found it bad | ||
| - Got a new carburetor and hooked everything up with my spare distributor coil | ||
| - Installed new thermostat | Parts Master | 32129 |
| 09 October 2000 | ||
| - Hooked up new Distributor Coil after replacement | Niehoft | AL179 |
| - Found one found not hooked up on distributor coil and fired right up after attachment | ||
| - Replaced rear wheel and tire assemblies | ||
| - Discovered no brakes and leaking brake slave cylinder | ||
| 15 October 2000 | ||
| - R2'd Left Rear Brake Cylinder after cleaning | ||
| - Replaced front wheel and tire assemblies | ||
| - Replaced right rear brake cylinder | Ray Bestos | WC37235 |
| - Bleed Brakes | Still Squishy | |
| 24 March 2001 | ||
| - Removed driver side glass | ||
| - Installed window rollers | A-One Auto Salvage | |
| 25 March 2001 | ||
| - Installed driver glass with cork vibration gromets | ||
| 03 June 2001 | ||
| - Removed entire dash wiring harness | ||