From: Pete To: Christian Docksey ; 3dsmax@engram.net <3dsmax@engram.net> Subject: Re: Gforce boards Date: Friday, April 28, 2000 3:36 PM Don't know which version you are using I have the V6600 deluxe. I have had none of those problems but I used to get some hard to describe transparent edges. But their latest beta driver from the Asus site solved that problem. I am using it in Win2K. So depending on the model board you have I would suspect the drivers Pete ----- Original Message ----- From: "Christian Docksey" To: <3dsmax@engram.net> Sent: Friday, April 28, 2000 1:41 PM Subject: Gforce boards > Hello all, > > I have tried the gforce 256 video card from Asus in Max and although it > does accelarate geometry, there is a very annoyning delay every time you > are going to do something in the viewport. For example, if you are going > to do a viewport revolve in a perspective view, there is a 1/2 second > delay before it starts revolving. After that its fast until you let go > to do something else like selecting an object where it will have another > delay. > > Has anybody tried the Elsa Erazor board 9which uses the same chipset). > Has anybody experienced similar delays (like staggering) with the Elsa > Erazor board. I,m hoping the delays are due to drivers, and as elsa are > better at drivers, I,m hoping this won't be a problem with Erazor in > Max. > > Thanks all.... > Chris > > -- > Subscribe/Unsubscribe at: > http://mail.engram.net/guest/RemoteListSummary/3DSTUDIOMAX > List courtesy of http://www.Engram.net > -- Subscribe/Unsubscribe at: http://mail.engram.net/guest/RemoteListSummary/3DSTUDIOMAX List courtesy of http://www.Engram.net