From: Bell, Ross To: 3DSMAX (E-mail) <3DSMAX@ENGRAMDIGITAL.COM> Subject: RE: Patches Date: Thursday, April 13, 2000 7:37 AM As far as I know they are created from a single edge, but if someone has a multi edge solution I would love to hear it (would save time). Ross -----Original Message----- From: T Goodwin [mailto:T.Goodwin@vrsolns.co.uk] Sent: Thursday, April 13, 2000 5:31 AM To: 3DARK (E-mail); 3DSEngram (E-mail) Subject: Patches When editing patches I want to add a quad / tri patch. I select the edge that I want and then add which works fine BUT what I want to do is :- a simple example. Make a cube , delete 1 face. Turn it into an editable patch. I want to be able to select the 4 edges and create a patch between them. When I select multiple edges , it creates multiple patches. Can you create patches this way or are they always created from a single edge and then vertex welded? Cheers Tim ------------------------------------------------------------------------ -------------------------------------------------------- Tim Goodwin 3D Graphic Modeller Virtual Presence MUSE Technologies, Inc. Disclaimer: The information contained in this email is intended only for the use of the person(s) to whom it is addressed and may be confidential or contain legally privileged information. If you are not the intended recipient, you are hereby notified that any perusal, use, distribution, copying or disclosure is strictly prohibited. If you have received this email in error, please immediately advise us by return email and delete the email document without making a copy. Warning: This email may contain commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited. -- Subscribe/Unsubscribe at: http://mail.engram.net/guest/RemoteListSummary/3DSTUDIOMAX List courtesy of http://www.Engram.net -- Subscribe/Unsubscribe at: http://mail.engram.net/guest/RemoteListSummary/3DSTUDIOMAX List courtesy of http://www.Engram.net