Intel Celeron processor 266/300MHz Single Edge Contact Cartridge
design not include a dedicated L2 cache Slot 1 connector
Chipset
Intel 440EX core and FDC37M602 Super I/O controller
High performance core chip with two BGA package
Memory
2 DIMM banks for EDO/SDRAM module
3.3V EDO/SDRAM supported (168pin unbuffered DIMM) Supports up to 256MB (128MB x 2 banks)
Video
Built-in AGP graphic controller (ATI RAGE IIC) SGRAM 2Mbyte Video Memory on Board
Audio
Built-in high performance 3D ISA audio CODEC Built-in ISA audio CODEC (CS4235B)
Onboard I/O Connectors
Two USB port (One in front panel, the other in rear port): Keyboard, Mouse, CCD Camera
Two PS/2 port: Keyboard, Mouse Two Serial port: COM1 port and optional COM2 port by Header Connector
One Parallel port: DB25, LPT1 One Audio/Joystick port: 1 Speaker, 1MIC_IN, 1 LINE_IN, 1 MIDI/Joystick port (front panel) One FDD connector: 34-pin, boxing type Two E-IDE connector: 40-pin, boxing type, primary and secondary interface One power connector: 20-pin, standard ATX power connector module
One power connector: 6-pin, 1394 power connector (option) One AMC connector: 38-pin, ATI AMC interface
Expansion Slots
2 ISA, 2 PCI slots and 1 shared slot
Form Factor
microATX 243mm x 223mm x 1.6t (4 Layers)
Protection and Management
ECC on memory, DMTF compliant software
Level-one Alert generation in system temperature, voltage, FAN speed, chassis intrusion
Level-three Remote wake up over LAN, service boot
Level-4 Resume to task, improved power management, OS independent management FAN off
Support Intel's OPSD manageability level-3 Remote wake up solution : LAN (option) and Modem
FAN control logic: CPU Fan, system Fan (option) System chassis intrusion (option)
System voltage and temperature management (option)