Curriculum Vitae
|
Name: |
Fernandes
de Lima, Milton Sérgio |
|
|
Birth
date: |
09/July/68 |
|
|
Birthright: |
São
Paulo |
|
|
Nationality: |
Brazilian
|
|
|
Marital
status: |
Married |
|
|
Address: |
Av.
de France, 55 1004 Lausanne Switzerland Private
phone: ++41.21.648.0533 Private
Email: [email protected] |
Formation
|
period |
course |
institution |
theme |
|
Jan.
1998 - Dec. 2000 |
Post
doctorate |
Center
for Laser Treatment of Materials / Swiss Federal Institute of Technology |
Laser Welding of Aluminum Alloys.Solid-State Transformations of
Duplex Steels.
Direction: Prof. W. Kurz |
|
Sep.1992
- Dec. 1997 |
Doctor
in Engineering |
Engineering
School of the University of São Paulo |
Microstructure
of Laser Remelted Fe-Si-C Alloys. Direction: Prof. H. Goldenstein |
|
Jul.
1995 - Nov. 1996 |
Training |
Department
of Materials / Swiss Federal Institute of Technology at Lausanne |
Laser
Remelting of Cast Irons. Direction:
Prof. W. Kurz |
|
Jun.
1990 - Sep. 1992 |
Master
of Science |
Institute
of Nuclear and Energetic Researches / National Commission for Nuclear Power |
Production,
Microstructure and Mechanical Characterization of Nickel Aluminides Produced
by Rapid Solidification, Classification: 10 with Distinction and Honor. Direction:
Prof. P.I. Ferreira |
|
Jan.
1989 - Dec. 1989 |
Scientific
Initiation Program |
Institute
of Nuclear and Energetic Researches/ National Commission for Nuclear Power |
Determination
of the Crystallite Size of Al2O3:ZrO2
Ceramics by X-ray Diffractometry, Classification: approved. Direction:
Dr. N.B. Lima |
|
Jan.
1986 - Dec. 1989 |
Physics |
Pontifical
Catholic University of São Paulo |
|
Employment
|
period |
function |
employer |
|
Jan.
1998 - Dec.
2000 |
Associated
Researcher |
Swiss
Federal Institute of Technology - Lausanne (Switzerland) |
|
Jan.
1997 - Dec.
1997 |
Post-graduation
professor |
Universidade
Bandeirantes (UNIBAN) - private university |
|
Jan.
1997 - Dec.
1997 |
Doctor
in Engineering scholarship |
Fundação
de Amparo à Pesquisa do Estado de São Paulo (FAPESP) |
|
Jul.
1995 - Nov.
1996 |
Trainee |
Commission
Fédérale des Bourses pour Etudiants Etrangers (Swiss Government) |
|
Sep.
1992 - Jun.
1995 |
D.E.
- Federal scholarship |
Coordenadoria
de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) |
|
Jul.
1991 - Dec.
1991 |
High
school teacher. Discipline: Physics |
State
Government of São Paulo |
|
Jan.
1990 - Sep.
1992 |
M.Sc.
- federal scholarship |
Comissão
Nacional de Pesquisas (CNPq) |
|
Jan.
1989 - Dec.
1989 |
Scientific
trainee - federal scholarship |
Comissão
Nacional de Pesquisas (CNPq) |
|
Sep.
1987 -Jan. 1989 |
Technical
staff (X-ray Diffraction Laboratory) |
Instituto
de Pesquisas Energéticas e Nucleares / SP |
|
Jul.
1983 - Sep.
1987 |
Administrative
staff (archivist) |
Banco
Itaú S/A (Bank) |
Actual activities
|
theme |
team |
industrial partner |
|
Reducing
hot-cracking during laser welding of aluminum alloys |
W.
Kurz, M. Lima, J.-D. Wagnière, M. Rappaz and J.M. Drezet |
AlGroup
of Switzerland Ltd. |
|
Solid-state
transformations in duplex steels |
W.
Kurz, M. Lima and J.-D. Wagnière |
Von
Moos /Swiss Steel AG |
Some former activities
|
year |
task |
my function |
team |
results |
|
1990 |
Determination
of the degree of hydration in Uranium Oxides |
technical
(diffractometry) |
L.
Gallego, N.B. Lima & M. Lima |
internal
quality control procedure |
|
1990-1992 |
Integrated
research in intermetallic compounds (rapid solidification, powder metallurgy
and conventional casting) |
member
of the Intermetallics Laboratory |
P.I.
Ferreira, M. Lima, P.E.S. Reis & J.C.C. Paola |
development
of equipment, thesis and publications |
|
1991 |
Strip
casting with the belt/roll process |
collaborator |
Near-net
Shape Committee coming from different Research Institutes and the Mannesmann
Co. |
project
of a equipment for produce thin slabs of stainless steel |
|
1993 |
Structure
of liquid alloys |
collaborator |
M.
Lima & J.D.T. Capocchi |
two
presentations |
|
1993 |
Study
of lattice defects in Fe-Cr alloys by molecular dynamics using Embedded Atom
Method |
collaborator
(potentials problem) |
D.
Farkas, C.G. Schön, M. Lima & H. Goldenstein |
one
paper |
|
1993-1996 |
Mössbauer
studies in austenitic alloys |
collaborator |
H.
Goldenstein, C.G. Schön & M. Lima |
|
|
1993-1995 |
Reordering
and recovering in off-stoichiometric Ni3Al alloys |
collaborator |
J.A.S.
Tenório, A.M. Barros & M. Lima |
one
Thesis from Barros |
|
1993
and 1994 |
Phase
Diagrams (postgraduate course) |
invited
lecture in intermetallics |
J.A.S.
Tenório |
|
|
1994 |
Thermal
treatment of silicon wafers |
collaborator |
LSI/USP |
|
|
1994-1995 |
Transformation
kinetics of kappa-Fe3AlC phase embedded in a ferrite matrix |
individual
research |
M.
Lima |
one
presentation |
|
1994 |
Coordinator
of the Materials Processing Session in the 17th. National Meeting of
Condensed Matter Physics |
invited
collaborator |
Materials
Science Session |
|
|
1996-1997 |
Laser
Processing Committee sponsored by CYTED - Programa Iberoamericano de Ciencia
y Tecnologia para el Desarrollo |
member |
Head:
Prof. R. Vilar (ICT-Portugal) |
|
|
1998-2000 |
Consulting
Services - biomaterials treatement, welding of 316 stainless steel for
watches, joinning of copper alloys for high-power electrical devices, phase
diagram of intermetalic FeAlCr alloys for aerospace applications,
solidification of commercial Al alloys, laser cleaning of surfaces,... |
researcher |
CTML
group |
development
of small-size industries |
|
2000 |
1o
Congresso em Ciência de Materiais da Região Sul - SULMAT'2000 |
referee |
Cento
de Ciências Tecnológicas - CCT/UDESC-Joinville (Brazil) |
Two
papers referred |
|
2000 |
WHALE
- Welding of High-strength Aluminium Alloy - European Brite-Euram Project |
Swiss
F. Inst. Technology representant |
Various
European partners |
Work
proposal |
|
2000 |
Hot
Keyboard® - A program for macro implementation - TB Labs (Australia) |
Portuguese
interface |
M.
Lima |
A$
39 (australian dollars) in programs |
Conferences
|
tile |
event |
place and year |
|
Massive
transformations and absolute stability |
TMS
fall meeting'00 |
Missouri-USA
(2000) |
|
Laser
welding of X2CrNi12 steel |
Duplex
Stainless Steel'2000 |
Venezia-Italy
(2000) |
|
Microstructural
characterization of solidification and solid-state transformation in a 12%Cr
steel |
Duplex
Stainless Steel'2000 |
Venezia-Italy
(2000) |
|
Simulation
of solidification cracking in high-strength aluminium alloys |
Worktable
WHALE project |
Athens-Greece
(2000) |
|
Kinetics
of graphite dissolution and formation of a ductile iron during laser
remelting |
VIII
Congreso Nacional de Tratamientos Térmicos TRATERMAT-2000 |
Barcelona-Spain
(2000) |
|
Determination
of the laser absorption of an aluminum-silicon alloy by calorimetry (E.M.R.
Silva, W.A. Monteiro, W. Rossi, and M.S.F. Lima) |
I
Panamerican Conference on Thermal Analysis and Calorimetry |
Poços
de Caldas-Br (2000) |
|
Directional
Solidification and Solid State Transformation |
International
Conference on Solid-solid Phase Transformations 99 (Presented by W. Kurz) |
Kyoto-Japan
(1999) |
|
Low-velocity
growth in laser resolidified Fe-C-Si alloys |
Sixth
International Symposium on Science and Processing of Cast Iron, Birmingham |
Alabama-USA
(1998) |
|
Laser
remelting of cast iron |
Invited
seminar in the Materials Department of the Instituto Superior Técnico |
Lisbon-Portugal
(1996) |
|
Study
of the mechanisms of recovering in rapidly solidified Ni3Al alloys |
50th.
Annual Congress of Brazilian Association of Metallurgy and Materials |
São
Pedro-SP-Br (1996) |
|
Calorimetric
analysis of recovering and ordering mechanisms in a Ni3Al alloys |
50th.
Annual Congress of Brazilian Association of Metallurgy and Materials |
São
Pedro-SP-Br (1996) |
|
Order-disorder
transitions in Fe-Al-C duplex alloys |
18th.
National Meeting of Condensed Matter Physics |
Caxambú-MG-Br
(1995) |
|
Reversibility
of the order in rapidly solidified Ni3Al(B) alloys" |
15th.
Brazilian Congress of Materials Engineering and Science |
Águas
de São Pedro-SP-Br (1994) |
|
Application
of the Embedded Atom Method to defects in Fe-Cr alloys |
17th.
National Meeting of Condensed Matter Physics |
Caxambú-MG-Br
(1994) |
|
Viscosity
of Pb-Sn melts |
47th.
Annual Congress of Brazilian Association of Metallurgy and Materials |
Rio
de Janeiro-RJ-Br (1993) |
|
Production
and microstructural and mechanical properties of nickel aluminides produced
by rapid solidification technique |
47th.
Annual Congress of Brazilian Association of Metallurgy and Materials |
Rio
de Janeiro-RJ-Br (1993) |
|
Liquid
metals structure determinated by X-ray diffraction |
16th.
National Meeting of Condensed Matter Physics |
Caxambú-MG-Br
(1993) |
|
Microstructural
and mechanical characterization of rapidly solidified nickel aluminides |
46th.
Annual Congress of Brazilian Association of Metals |
Belo
Horizonte-MG-Br (1992) |
|
Ductilization
of the Ni3Al |
15th.
National Meeting of Condensed Matter Physics |
Caxambú-MG-Br
(1992) |
|
Microstructure
and mechanical properties of rapid solidify nickel aluminides: first results |
14th.
National Meeting of Condensed Matter Physics |
Caxambú-MG-Br
(1991) |
|
Elaboration
of rapid solidification ribbons of Ni3Al intermetallic alloys |
44th.
Annual Congress of Brazilian Association of Metals |
Rio
de Janeiro-RJ-Br (1990) |
Papers
|
title |
authors |
media |
|
Structure
of laser remelted surface of cast irons |
M.S.F.
Lima and H. Goldenstein |
Surface
Engineering 16 (2000) pp. 127-130. |
|
Morphological
instability of the austenite growth front in a laser remelted
iron-carbon-silicon alloy |
M.S.F.
Lima and H. Goldenstein |
Journal
of Crystal Growth 208 (2000), pp. 709-716. |
|
Developing
world packs industrial laser courses |
S.P.
Morato and M. Lima |
Opto-laser
Europe February (1999), pp. 51-52 |
|
Low-velocity
growth in laser resolidified Fe-C-Si alloys |
M.S.F.
Lima and W. Kurz |
International
Journal of Cast Metals Research 11 (1999), pp. 273-277. |
|
Microstructure
selection in Laser remelted Fe-C-Si alloys |
M.S.F.
Lima, P. Gilgien and W. Kurz |
Zeitschrift
für Metallkunde 11 (1998), pp. 751-757 |
|
Determinação
da absorção do feixe laser em ensaios de refusão em regime contínuo (in
Portuguese and Spanish) |
M.
Lima and J.-D. Wagnière |
Rev.
Metal. Madrid 32, no. 2 (1998), pp. 131-134 |
|
Embedded
atom computer simulation of lattice distortion and dislocation core structure
in Fe-Cr alloys |
D.
Farkas, C.G. Schön, M.S.F. Lima and H.Goldenstein |
Acta
Metallurgica et Materialia 44 (1996), pp. 409-419 |
|
Microstructure
and mechanical properties of nickel aluminides produced by rapid
solidification technique |
M.S.F.
Lima and P.I. Ferreira |
Intermetallics
Journal 4 (1996) pp. 85-90 |
Teaching activities
|
level |
field |
instituiton |
year |
|
Undergraduate |
Introduction
to Materials Science |
Assistance
to Prof. F. Folio (Swiss Federal Institute of Technology) |
1998-2000 |
|
Post-graduation |
Materials
Technology |
Universidade
Bandeirantes (private) |
1997 |
|
Manager
Formation |
Training
Course on the Basic Use of Lasers in Small Scale Industries |
IPEN-UNIDO |
1997 |
|
High
School |
Physics |
EESG
"Prof. Antonio Alves Cruz" |
1991 |
Semester and Diploma student projects
|
theme |
student |
year |
|
The
influence of laser extrinsic variables on the hot-cracking susceptibility of
aluminum alloys |
L.
Abbaschian (MIT-USA) |
1999 |
|
A
thermal modeling for directional solidification experiments and comparison
with experimental values |
S.
Miroslav (ETHZ-Switzerland) |
1999 |
|
Mechanical
control of aluminum laser welding |
V.
Petitpierre (EPFL-Switzerland) |
1998 |
|
Microsegregation
in alloys |
M.
Fuentenbro (The University of Cambridge-UK) |
1998 |
Some followed courses
|
course |
institution |
year |
|
Open
day: competing with information. E-business |
International
Institute for Management Development - IMD (Switzerland) |
2000 |
|
Design
of graphical interfaces |
Swiss
Federal Institute of Technology |
2000 |
|
Introduction
to Visual Basic |
Swiss
Federal Institute of Technology |
2000 |
|
Qualtity
Control at the workplace |
Swiss
Federal Institute of Technology |
2000 |
|
Measurements
techniques with National Instruments |
National
Instruments (Switzerland) |
2000 |
|
Windows
NT 4.0 network administrator (Microsoft certified) |
Swiss
Federal Institute of Technology |
1999 |
|
Industrial
applications of diode lasers |
Irepa
Laser (France) |
|
|
Industrial
engineering and materials science |
Swiss
Federal Institute of Technology |
1998 |
|
Industrial
automation |
National
Instruments (Switzerland) |
1998 |
|
Life
cycle of materials |
Swiss
Federal Institute of Technology |
1998 |
|
XVIII
symposium of technology development management |
Advanced
Researches Institute (Brazil) |
1994 |
|
Applications
of X-ray synchrotron radiation to materials science and technology |
National
Synchrotron Light Laboratory (Brazil) |
1993 |
|
Radiation
safety course |
Ethicon
Suturas Ltd. (Brazil) |
1991 |
|
III
Introductory course in nuclear technology |
Institute
of Nuclear and Energetic Researches (Brazil) |
1990 |
|
Introduction
to psicobiophysics |
Pontifical
Catholic University of São Paulo (Brazil) |
1987 |
Computers
|
environment/application |
experience |
|
Windows
NT and Macintosh |
Delegate
for Computing Facilities for the CTML (~ 10 persons) - Network administrator |
|
UNIX |
User |
|
Computer
simulation of materials problems |
Developer |
|
Homepages |
Conception
with MacromediaÒ and AdobeÒ tools |
|
Languages |
Turbo
Pascal, Fortran, HTML, and MS Visual Basic 6Ò |
Languages
|
language |
reading |
writing |
speaking |
|
Portuguese |
good |
good |
good |
|
French |
good |
good |
good |
|
English |
good |
good |
good |
|
Spanish |
good |
regular |
regular |
Professional address
Centre de Traitement des
Matériaux par Laser
Swiss Federal Institute of
Technology
C.P. 110
CH-1015 Lausanne (VD) Switzerland
Phone: +41.21.693.4913
Fax: +41.21.693.4916
E-mail: [email protected]
ICQ 10993993