Logoclipframe=5934
xpos=552
ypos=386
width=68
height=65
Minconstrastchange=0
#---------------------------------
|
|
|
|
|
|
|
|
|
|
|
|
| Logo Blend How To | |||||||||||
| Step1: Find a frame in your source that has the logo surrounded by black. If you plan to use a temporal filter, be sure that the frames around your template frame are also black. | |||||||||||
| #----------------------- Logoclipframe=5934 xpos=552 ypos=386 width=68 height=65 Minconstrastchange=0 #--------------------------------- |
|||||||||||
| Step 2: Insert the frame number into the sample script and change the MinContrast setting to 0 so we can see our effected area. | |||||||||||
| Step 3: Adjust the location and dimensions until the reversed area covers the logo with a 5 pixel border. | |||||||||||
| Step 4: Change the Mincontrastchange value to something above 0. (Values of 1-3 for low noise - 3 or higher for noisy sources.) | |||||||||||